-
Klein Tools Impact Swivel Socket Adapter Set, 3-Piece, 20-DegreeThe KLEIN TOOLS 65813SW is a 3-piece impact driver socket adapter set for reaching fasteners in confined spaces, with 1/4-inch (6.35 mm), 3/8-inch (9.525 mm) and 1/2-inch (12.7 mm) square drives and a 20-degree swivel. Three square-drive sizes — connect an impact driver to...
- £37.58
- £37.58
- Unit price
- per
-
Klein Tools 14-in-1 Impact-Rated Flip Socket Set, SAE and Metric, Magnetic 32914HDKlein Tools 32914HD is a 14-in-1 impact-rated flip socket set for fastening with impact drivers, combining six SAE and six metric sizes with a bit holder. Fully impact-rated — made for use with impact drivers. Six SAE and six metric sizes, plus a bit...
- £73.47
- £73.47
- Unit price
- per
-
AP 14-Piece Metric Nano Impact Socket Set, 3/8-Inch Drive, Low ProfileAstro Tools 78314 is a 14-piece, 3/8-inch-drive metric nano impact socket set made for impact work where a shorter socket profile can improve access. 0.88 inches (22.5 mm) long — a low-profile design for more compact access. 35% shorter than standard shallow impact sockets...
- £55.54
- £55.54
- Unit price
- per
-
LEXIVON E-TORX Socket Set, 13-Piece E4–E20 with Chrome Vanadium Steel and CaseThe LEXIVON E-TORX Socket Set is a 13-piece female external star socket set for turning external star fasteners, with E4–E20 sizes and two drive adapters. Female external star sockets — made for working with external star fasteners. Drop-forged, heat-treated Chrome Vanadium steel — hardened...
- £37.57
- £37.57
- Unit price
- per
-
JU JIAN TEC XZN Triple Square Bit Socket Set, 10-Piece with CaseJU JIAN TEC XZN Triple Square Bit Socket Set is a 10-piece set for engaging triple-square fasteners on vehicles including BMW, Mercedes, VW, Audi and Porsche, with sizes spanning M4 to M18. Drop-forged, heat-treated chrome vanadium steel — helps the sockets resist stripping during...
- £39.99
- £39.99
- Unit price
- per
-
Mumicol Low-Profile Impact Socket Adapter Set, 4-Piece CR-MO Steel for Tight SpacesMumicol’s 4-piece low-profile impact socket adapter set converts between four drive sizes and adds minimal height for work in confined spaces. Low-profile shape — reaches into tight areas such as engine bays and under dashboards. Heat-treated chromium-molybdenum steel with a black phosphate coating —...
- £34.01
- £34.01
- Unit price
- per
-
ARIES TOOLS Impact Socket Adapter Set, 4-Piece Low-Profile Magnetic HoldARIES TOOLS makes this four-piece impact socket adapter set to convert drive sizes and reach confined spaces, with a low-profile design and built-in magnetic socket hold. Four adapters for drive-size conversions — match sockets and tools with different drive sizes. Low-profile form with minimal...
- £49.56
- £49.56
- Unit price
- per
-
PLATINUMEDGE Bolt and Nut Remover Set, 13-Piece with 3/8-Inch DrivePLATINUMEDGE is a 13-piece bolt and nut remover set for extracting damaged fasteners, with reverse spiral flutes and a standard 3/8-inch (9.5 mm) square drive. 13 marked sizes — match a remover to the fastener you need to extract. CR-MO steel with hard performance...
- £44.41
- £44.41
- Unit price
- per
-
ELEAD 16-Piece Torx Bit Socket Set, T8–T60 with Three Drive SizesELEAD’s 16-piece Torx bit socket set is made for automotive and mechanical fastening tasks, with Torx sizes from T8 to T60. S2 steel and chrome vanadium steel construction — made for demanding mechanical and automotive work. Precision-machined tips with chamfered edges — designed for...
- £32.80
- £32.80
- Unit price
- per
-
Klein Tools SAE Impact Socket Set, 7-Piece with Colour-Coded 3/8-Inch DriveKLEIN TOOLS 33808 is a seven-piece SAE impact socket set for driving common SAE fasteners, with six color-coded sockets and a 3/8-inch (9.525 mm) drive. Six SAE socket sizes from 1/4 inch (6.35 mm) to 9/16 inch (14.2875 mm) — cover a range of...
- £35.19
- £35.19
- Unit price
- per
-
SEDY Socket Extension Bar Set, 9-Piece 1/4 and 3/8-Inch Drive with Universal JointsSEDY’s 9-piece socket extension bar set is made to extend ratchet reach for automotive, mechanical, and general repairs, with 1/4" (6.35 mm) and 3/8" (9.525 mm) drive sizes and two universal joints. Six extension lengths from 2" (5.08 cm) to 10" (25.4 cm) —...
- £34.01
- £34.01
- Unit price
- per
-
KLEIN TOOLS Metric Impact Socket Set, 10-Piece with Sleeve and AdapterKLEIN TOOLS 33809M is a 10-piece metric impact socket set for impact fastening work, with nine commonly used socket sizes and a 3/8-inch drive. Nine metric sockets from 8 mm to 19 mm — cover a range of common metric fastener sizes. Cold-forged, heat-treated...
- £49.54
- £49.54
- Unit price
- per
-
KLEIN TOOLS 23-Piece SAE Impact Socket Set with Pass-Through Sockets and MODbox CaseKLEIN TOOLS KNECT is a 23-piece SAE impact socket and driver-bit set for high-torque fastening, with cold-forged steel sockets and a MODbox storage case. 23-piece starter set — brings sockets, driver bits and adapters together in one kit. Cold-forged steel, impact-rated sockets — made...
- £73.47
- £73.47
- Unit price
- per
-
FTIHTRY Flexible Socket Extension Bar Set, 4-Piece, 6–12 in, 45° FlexFTIHTRY’s 4-piece flexible socket extension bar set helps reach tight, obstructed areas in auto repair, with extensions for 1/4-inch, 3/8-inch and 1/2-inch drives. Wound spring-steel shafts flex up to 45 degrees — angle the socket toward hard-to-reach work areas. Chrome-vanadium anvils and receivers with...
- £37.59
- £37.59
- Unit price
- per
-
NEIKO Torx Plus Bit Socket Set, 12-Piece 10086A with Three Drive SizesNEIKO 10086A is a 12-piece Torx Plus bit socket set for removing specialty fasteners in electronics, appliances and vehicles, with 1/4-inch (6.35 mm), 3/8-inch (9.525 mm) and 1/2-inch (12.7 mm) drives. 12 bit sockets across three drive sizes — match the socket to the...
- £38.80
- £38.80
- Unit price
- per
-
KLEIN TOOLS Mini Ratchet Set for Tight Spaces, 5-Piece with 72-Tooth Gear HeadThe Klein Tools 65200 Mini Ratchet Set is made for fastening in tight spaces, with a 72-tooth gear head that needs just a 5-degree sweep. High-strength chromium-vanadium steel handle — built to increase torque and tool life. Finger loop on the handle — supports...
- £33.99
- £33.99
- Unit price
- per
-
Malco Reversible Hex Chuck Drivers, 1/4 & 5/16-Inch, 2-Pack with Easy-Clean MagnetMalco MSHC is a two-pack of reversible hex chuck drivers for Malco zip-in and bit-tip screws, with 1/4-inch (6.35 mm) and 5/16-inch (7.94 mm) hex sockets. Reversible 1/4-inch and 5/16-inch hex socket — choose the socket size that matches the screw. Two drivers in...
- £37.86
- £37.86
- Unit price
- per
-
KLEIN TOOLS 3-in-1 Impact Socket, 3/4 and 9/16-Inch, 1/2-Inch DriveThe Klein Tools 66031 3-in-1 Slotted Impact Socket is designed to tighten and loosen most hot-line clamps and handle pole hardware, combining 3/4-inch and 9/16-inch hex sizes with a 1/2-inch drive. Alignment slot — helps position the socket on most hot-line clamps. Two hex...
- £74.68
- £74.68
- Unit price
- per
-
TUZkozs 1/2-Inch Drive Wheel Protector Impact Socket Set, 17–22 mm, 4-PieceTUZkozs makes this 1/2-inch drive metric impact socket set for wheel and tire work, with four deep sockets and protective covers for rims and lug nuts. 17, 19, 21 and 22 mm sockets — cover common metric sizes for wheel service. 360° scratch-resistant covers...
- £31.62
- £31.62
- Unit price
- per
-
Astro Tool Metric Nano Impact Socket Set, 13-Piece 1/4-Inch Drive Low-ProfileAstro Tool 78113 is a 13-piece set of low-profile Nano impact sockets for metric fasteners, built for a 1/4-inch drive. 13-piece socket set — gives you a compact group of sockets for metric fastening work. 1/4-inch drive — identifies the drive size to match...
- £58.04
- £58.04
- Unit price
- per
-
Generic Adjustable Universal Socket Wrench Set, 2 Sets, 10–19 mm, 3/8-Inch DriveGeneric Adjustable Universal Socket Wrench Tool Set is made for maintenance and repair work, with a flexible 10 mm–19 mm range and a 3/8-inch drive. Two sets — keep adjustable socket options ready for repair tasks. 10 mm–19 mm metric range — accommodates a...
- £39.86
- £39.86
- Unit price
- per
-
Qnkaa Metric Hex Bit Socket Set, 13-Piece 2–14 mm, S2 SteelQnkaa Hex Bit Socket Set is a 13-piece metric hex bit set for use with manual torque tools, with bits and sockets made from S2 alloy steel and CrV steel. Drop-forged, heat-treated S2 alloy steel bits and CrV sockets — made for repeated fastening...
- £30.42
- £30.42
- Unit price
- per
Get 10% off with WELCOME10
Sign up for our emails and get 10% off with code WELCOME10 (one use per customer). We only email people who sign up, and every email has an unsubscribe link.
