{"product_id":"comgrow-magnetic-3d-printer-build-surface-2-piece-removable-flexible-plate","title":"Comgrow Magnetic 3D Printer Build Surface, 2-Piece Removable Flexible Plate","description":"\u003cp\u003e\u003cstrong\u003eComgrow Creality Original 2-piece magnetic 3D printer build surface is designed to make printed models easier to remove, with a flexible removable top and an adhesive magnetic base.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo magnetic surface pieces — a flexible upper build surface and a lower adhesive base form the removable setup.\u003c\/li\u003e\n\u003cli\u003eFlexible, detachable top — bend the surface after printing to help release a finished model.\u003c\/li\u003e\n\u003cli\u003e3M adhesive lower base — attaches to a standard build plate.\u003c\/li\u003e\n\u003cli\u003eCompatible with FDM printers and heated or non-heated beds — supports a range of printer setups.\u003c\/li\u003e\n\u003cli\u003eCuttable flexible surface — trim it to suit different build sizes.\u003c\/li\u003e\n\u003cli\u003eHeat the bed for 2–3 minutes before removal — follow the recommended preparation when using removal tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis build surface is made for FDM printing setups where lifting a finished model from the bed is part of the workflow. Its removable upper layer lets you take the printed surface off the printer, then flex it to help release the model. The magnetic attachment keeps the two layers together during use, while the adhesive base provides the part that attaches to the build plate.\u003c\/p\u003e\n\u003ch3\u003eHow does the magnetic surface help remove a printed model?\u003c\/h3\u003e\n\u003cp\u003eAfter printing, detach the flexible upper surface from its lower magnetic base and bend it to help the model release. The surface is designed to come off the build plate, so you can flex it away from the printer rather than trying to remove the model while the surface is attached. Before using removal tools, heat the hot bed for 2–3 minutes as recommended.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRemove the upper magnetic surface from the lower layer.\u003c\/li\u003e\n\u003cli\u003eFlex the removable surface to help release the model.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat comes in the 2-piece build surface set, and how is it installed?\u003c\/h3\u003e\n\u003cp\u003eThe set includes an upper magnetic build surface and a lower magnetic adhesive base. Place the lower base on top of the printer’s normal build plate. Before installation, check that the bottom of the soft magnetic sticker and the upper layer attract firmly; if they do not, rotate one layer 90 degrees and test again. Once the correct magnetic direction is established, attach the lower part to the hot bed.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the magnetic layers hold together before attaching the adhesive base.\u003c\/li\u003e\n\u003cli\u003eCheck their orientation first so the layers do not separate.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill this build surface fit different FDM printer beds?\u003c\/h3\u003e\n\u003cp\u003eThe surface works with FDM printer models and with heated or non-heated 3D printer beds. Its flexible upper layer can be cut to fit different build sizes, so compare the surface with your printer’s build plate before trimming. The lower adhesive base is intended to attach to a normal build plate.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor FDM printers.\u003c\/li\u003e\n\u003cli\u003eFor heated and non-heated beds.\u003c\/li\u003e\n\u003cli\u003eCut the flexible surface to the required build size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis set suits FDM printer users who want a removable surface that can flex to help release printed models, including those adapting a surface to different build sizes. Its two magnetic layers, adhesive attachment, and cuttable upper surface support that removal-focused workflow.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do you remove a model from the Comgrow magnetic 3D printer build surface?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Remove the flexible upper surface from its magnetic base, then bend it to help release the model. Heat the hot bed for 2–3 minutes before using removal tools.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which printers and beds work with the Comgrow magnetic 3D printer build surface?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The Comgrow surface works with FDM printer models and heated or non-heated 3D printer beds. Its flexible upper layer can be cut to suit different build sizes.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"Comgrow","offers":[{"title":"Default Title","offer_id":57568120340858,"sku":"B0CVX41YVF","price":31.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/comgrow-magnetic-build-surface-front-view.jpg?v=1794724061","url":"https:\/\/bargaincatcher.co.uk\/products\/comgrow-magnetic-3d-printer-build-surface-2-piece-removable-flexible-plate","provider":"BARGAIN CATCHER","version":"1.0","type":"link"}