{"title":"WORKPRO","description":"\u003cp\u003eThe WORKPRO line-up at Bargain Catcher covers \u003ca href=\"\/collections\/pliers\"\u003ePliers\u003c\/a\u003e, \u003ca href=\"\/collections\/car-tools-equipment\"\u003eCar Tools \u0026amp; Garage Equipment\u003c\/a\u003e and \u003ca href=\"\/collections\/spanners-wrenches\"\u003eSpanners \u0026amp; Wrenches\u003c\/a\u003e. The range runs to 52 products in 18 of our categories. Common details include oil filter wrench, kneeling pad and NBR Foam Cushion. \u003c\/p\u003e\u003cp\u003eMeasure the opening, fixing or fitting first, then compare it with the dimensions on the product page. The range spans 4 of our departments, led by \u003ca href=\"\/collections\/diy-tools\"\u003eDIY \u0026amp; Tools\u003c\/a\u003e. \u003c\/p\u003e\u003cp\u003eSee every brand with its own page on \u003ca href=\"\/pages\/shop-by-brand\"\u003eShop by brand\u003c\/a\u003e. \u003c\/p\u003e","products":[{"product_id":"workpro-water-meter-key-17-inch-with-4-way-utility-key-and-non-slip-t-handle","title":"WORKPRO Water Meter Key, 17-Inch with 4-Way Utility Key and Non-Slip T-Handle","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO is a water meter and shut-off key for operating outdoor underground valves, with a 17-inch (43.18 cm) extended reach and an included 4-way utility key.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-strength forged steel — made for demanding outdoor use.\u003c\/li\u003e\n\u003cli\u003eVinyl-wrapped T-handle — provides a non-slip grip and control.\u003c\/li\u003e\n\u003cli\u003ePowder-coated finish — helps prevent rust and corrosion outdoors.\u003c\/li\u003e\n\u003cli\u003e4-way utility key — fits standard water, gas, and electrical cabinets.\u003c\/li\u003e\n\u003cli\u003eExtended shaft — reaches valves in underground boxes and meter pits.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOutdoor shut-off valves can sit below ground or inside curb boxes and meter pits, making them difficult to reach by hand. WORKPRO combines a long-handled water key with a separate 4-way utility key for homeowners and field technicians who need a tool for outdoor valve access and standard utility cabinets.\u003c\/p\u003e\n\u003ch3\u003eHow far can the WORKPRO water meter key reach?\u003c\/h3\u003e\n\u003cp\u003eThe 17-inch (43.18 cm) shaft is designed to reach deep or hard-to-access underground water valves. Its extended length can help you operate a valve without bending or kneeling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade for underground water valves\u003c\/li\u003e\n\u003cli\u003eSuitable for curb boxes and meter pits\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat are the handle and shaft made for?\u003c\/h3\u003e\n\u003cp\u003eThe key is made from high-strength forged steel for tough outdoor conditions and heavy use. A non-slip vinyl wrap on the T-handle gives you a secure hold, helping you turn stubborn valves with less effort, including in wet or muddy conditions. The powder-coated finish is designed to resist rust and corrosion in outdoor weather.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eT-shaped handle for grip and control\u003c\/li\u003e\n\u003cli\u003ePowder-coated surface for outdoor use in rain or shine\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat can the included 4-way utility key open?\u003c\/h3\u003e\n\u003cp\u003eThe included 4-way utility key is compatible with standard water, gas, and electrical cabinets. This adds cabinet access to the set alongside its use for underground water shut-off valves.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIncludes one 4-way utility key\u003c\/li\u003e\n\u003cli\u003eUseful for homeowners and field technicians\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWORKPRO suits homeowners and field technicians who need extended reach for outdoor underground water valves and a utility key for standard service cabinets. Its 17-inch shaft, forged-steel construction, non-slip T-handle, and included 4-way key bring these tasks together in one set.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the WORKPRO water meter key?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO water meter key has a 17-inch (43.18 cm) extended shaft for reaching deep or hard-to-access underground water valves.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the WORKPRO 4-way utility key compatible with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO 4-way utility key is compatible with standard water, gas, and electrical cabinets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564392620410,"sku":"B0F53LB63G","price":32.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-water-meter-key-front-view.jpg?v=1794669596"},{"product_id":"workpro-automatic-center-punch-set-2-piece-adjustable-spring-loaded-tools","title":"WORKPRO Automatic Centre Punch Set, 2-Piece Adjustable Spring-Loaded Tools","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO 2PCS Automatic Center Punch is a two-tool set for making a starting indentation before drilling, with spring-loaded action adjustable at the cap.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo punches, one ball cap, and one replaceable tip — keep a spare tip available for marking tasks.\u003c\/li\u003e\n\u003cli\u003eS2 steel tips with an electroplated finish — provide the contact points for marking.\u003c\/li\u003e\n\u003cli\u003eAluminum alloy bodies with a black oxide surface — add corrosion resistance to the tool bodies.\u003c\/li\u003e\n\u003cli\u003eKnurled grip and ergonomic ball cap — support a secure hold and help protect the palm during use.\u003c\/li\u003e\n\u003cli\u003eWorks on metal, wood, stone, and plastic — make target marks for drilling or use the punch as an emergency vehicle window breaker.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor drilling, a bit can slip away from the intended spot before it starts cutting. A center punch makes a small indentation at the target point to help keep the bit from slipping and support more precise placement. This set is made for marking and drilling tasks across several materials, with an adjustable impact setting for different applications and materials.\u003c\/p\u003e\n\u003ch3\u003eWhat comes with the WORKPRO punch set?\u003c\/h3\u003e\n\u003cp\u003eThe set contains two automatic center punches and one additional replaceable punch tip. One punch has a ball cap, which is ergonomically shaped to protect the palm during use. The extra tip gives you a replacement for the punch tip when needed, while the two tools provide a pair for marking work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo automatic center punches\u003c\/li\u003e\n\u003cli\u003eOne additional replaceable punch tip\u003c\/li\u003e\n\u003cli\u003eOne punch has a protective ball cap\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do you adjust the punch impact?\u003c\/h3\u003e\n\u003cp\u003eRotate the cap to change the spring-loaded punch’s impact force. This adjustment lets you set the force to suit different applications and materials, rather than relying on one fixed impact setting. The punch creates an indentation at the chosen point for marking or drilling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBuilt-in spring-loaded mechanism\u003c\/li\u003e\n\u003cli\u003eImpact force adjusted by rotating the cap\u003c\/li\u003e\n\u003cli\u003eNo separate impact-force settings or measurements are provided\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich materials and tasks is it designed for?\u003c\/h3\u003e\n\u003cp\u003eThe WORKPRO automatic center punch can mark metal, wood, stone, and plastic. Its indentation gives a drill bit a defined starting point and helps prevent slipping, supporting accurate placement. It can also serve as an emergency window breaker for vehicles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for marking metal, wood, stone, and plastic\u003c\/li\u003e\n\u003cli\u003eCreates a small indentation at the target location\u003c\/li\u003e\n\u003cli\u003eCan be used as an emergency vehicle window breaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe set suits DIY users and others carrying out marking or drilling work who want an adjustable impact and a replaceable tip in a two-punch kit. Its material range also accommodates tasks on metal, wood, stone, and plastic. It is a practical choice for creating a defined drill-start mark, with a ball cap on one punch for palm protection during use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the WORKPRO automatic center punch set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO automatic center punch set includes two punches and one additional replaceable punch tip. One of the punches has a ball cap.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do you adjust the impact on the WORKPRO automatic center punch?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Rotate the cap on the WORKPRO automatic center punch to adjust its spring-loaded impact force for different applications and materials.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564840526202,"sku":"B0D5H3R55F","price":31.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-automatic-center-punch-pair.jpg?v=1794671571"},{"product_id":"workpro-mini-pliers-wrench-4-inch-smooth-jaw-tool-for-precision-repairs","title":"WORKPRO Mini Pliers Wrench, 4-Inch Smooth-Jaw Tool for Precision Repairs","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Mini Pliers Wrench is a 4-inch tool for precision repairs and tight-access work, combining pliers and wrench functions with smooth parallel jaws.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeat-treated steel with a plated finish — provides strength, wear resistance, and corrosion protection.\u003c\/li\u003e\n\u003cli\u003eHigh-leverage transmission — delivers gripping force with less effort and supports controlled adjustments.\u003c\/li\u003e\n\u003cli\u003eLightweight pliers-and-wrench design — keeps two tool functions in one portable companion.\u003c\/li\u003e\n\u003cli\u003eCompact profile — helps reach tight or hard-to-access spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSmall repairs often call for controlled gripping in places where a larger tool is difficult to position. WORKPRO Mini Pliers Wrench is made for precision tasks, everyday repairs, and everyday carry, with applications ranging from bicycle maintenance to plumbing and automotive work. Its compact format also suits DIY projects and workshop tasks that involve gripping, holding, tightening, or adjusting fasteners and components.\u003c\/p\u003e\u003ch3\u003eWhat kinds of jobs is WORKPRO Mini Pliers Wrench made for?\u003c\/h3\u003e\u003cp\u003eIt is designed for repair and adjustment work at home, in a workshop, on a bicycle, or around automotive and plumbing components. The combined pliers-and-wrench function makes it useful for gripping and holding parts as well as tightening or adjusting fasteners. Its slim profile is intended to help with precision tasks in confined or hard-to-reach spaces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBicycle maintenance and automotive repairs\u003c\/li\u003e\n\u003cli\u003ePlumbing tasks and DIY projects\u003c\/li\u003e\n\u003cli\u003eEveryday carry and routine repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow do the smooth parallel jaws grip?\u003c\/h3\u003e\u003cp\u003eThe jaws stay parallel as they grip, distributing pressure evenly across the gripping surface. Their smooth faces are designed to hold securely without damaging finished materials. An adjustable jaw opening lets the wrench accommodate a range of sizes, so it can be set for different fasteners and components.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eParallel jaw alignment for even contact\u003c\/li\u003e\n\u003cli\u003eSmooth gripping surfaces for finished materials\u003c\/li\u003e\n\u003cli\u003eAdjustable opening for varied sizes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat construction and control features does it have?\u003c\/h3\u003e\u003cp\u003eWORKPRO Mini Pliers Wrench is made from heat-treated steel and has a plated finish. The steel construction and finish provide strength, wear resistance, and corrosion protection for use in home, automotive, and workshop settings. A high-leverage transmission system is designed to produce powerful gripping force with minimal effort, helping you maintain control while gripping, holding, tightening, or adjusting.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeat-treated steel construction\u003c\/li\u003e\n\u003cli\u003ePlated finish for corrosion protection\u003c\/li\u003e\n\u003cli\u003eHigh-leverage mechanism for controlled tool use\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis compact wrench suits people who need a portable tool for precision repairs, everyday carry, bicycle work, plumbing, automotive tasks, or DIY projects. It is a 4-inch pliers-and-wrench tool with smooth parallel jaws and an adjustable opening for varied gripping and adjustment work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What jobs can the WORKPRO Mini Pliers Wrench be used for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Mini Pliers Wrench is designed for bicycle maintenance, plumbing, automotive repairs, DIY projects, workshop tasks, and everyday carry.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the WORKPRO Mini Pliers Wrench grip different sizes?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The WORKPRO Mini Pliers Wrench has an adjustable jaw opening to accommodate a range of sizes, with smooth parallel jaws for even pressure.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564841345402,"sku":"B0FX93T6ZZ","price":34.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-mini-pliers-wrench-front-view.jpg?v=1794671632"},{"product_id":"workpro-6-piece-mini-pliers-set-with-pouch-for-precision-repairs","title":"WORKPRO 6-Piece Mini Pliers Set with Pouch for Precision Repairs","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO Mini Pliers Set is a precision tool kit for meticulous repairs and electronics projects, bringing six mini plier shapes together with a storage pouch.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSix plier profiles, from 4-inch mini diagonal pliers (10.16 cm) to 6-inch mini needle nose pliers (15.24 cm) — choose a shape for detailed tasks.\u003c\/li\u003e\n\u003cli\u003eDrop-forged carbon steel with nickel plating — provides rust protection and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eHigh-frequency processed cutting edges — made sharper and more robust for cutting tasks.\u003c\/li\u003e\n\u003cli\u003eDouble spring shrapnel on each plier — automatically reopens the tool to reduce hand effort.\u003c\/li\u003e\n\u003cli\u003eBi-material TPR handles with an anti-slip design — offer a comfortable grip during extended work.\u003c\/li\u003e\n\u003cli\u003eA storage pouch is included — keep the set together for storage and carrying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSmall repairs and detailed projects can call for more precise handling than larger tools allow. This set is made for close-up work, including jewelry making, circuit-board tasks and small electronics projects. Its range of plier shapes gives beginners and experienced users options for different kinds of meticulous work.\u003c\/p\u003e\n\u003ch3\u003eWhat pliers are included in the WORKPRO mini set?\u003c\/h3\u003e\n\u003cp\u003eThe set brings together six mini plier types, with lengths from 4 to 6 inches (10.16 to 15.24 cm). Each shape serves a different task, so you can select the profile that suits the work in front of you.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4-inch mini diagonal pliers (10.16 cm) and 4-inch mini end cutting pliers (10.16 cm)\u003c\/li\u003e\n\u003cli\u003e5-inch mini long nose pliers (12.7 cm), 5-inch mini linesman pliers (12.7 cm) and 5-inch mini bent nose pliers (12.7 cm)\u003c\/li\u003e\n\u003cli\u003e6-inch mini needle nose pliers (15.24 cm)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do the handles and spring design support detailed work?\u003c\/h3\u003e\n\u003cp\u003eEach plier uses double spring shrapnel to open automatically after the handles are released. This spring action helps save effort and supports working with two or three fingers in tight areas. The bi-material TPR handles are soft and elastic, while their anti-slip design helps keep the tools easier to handle during longer tasks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomatic opening is built into every plier.\u003c\/li\u003e\n\u003cli\u003eThe spring design is intended to help reduce fatigue during use.\u003c\/li\u003e\n\u003cli\u003eHigh-frequency processing is applied to the cutting edges.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat projects is this pliers set suited to?\u003c\/h3\u003e\n\u003cp\u003eThe WORKPRO set is intended for precise repair work and small-scale projects, and it suits both beginners and professionals. Its mini format is useful for tasks such as jewelry making, circuit-board work and small electronics projects. The included pouch provides a place to store and carry the tools together.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse it for meticulous chores and small repairs.\u003c\/li\u003e\n\u003cli\u003eApply it to jewelry-making and circuit-board projects.\u003c\/li\u003e\n\u003cli\u003eStore and carry the set in its included pouch.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis set is a practical fit for people who regularly work on small components, electronics or jewelry and want several plier profiles in one kit. Its six mini shapes, spring-assisted opening and included pouch support detailed work and organized storage.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools are included in the WORKPRO Mini Pliers Set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Mini Pliers Set includes mini diagonal, long nose, end cutting, needle nose, linesman and bent nose pliers, plus a storage pouch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What projects can I use the WORKPRO Mini Pliers Set for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Mini Pliers Set is made for meticulous repairs, jewelry making, circuit-board tasks and small electronics projects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564854452602,"sku":"B087613JTM","price":39.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-mini-pliers-set-full-set.jpg?v=1794671919"},{"product_id":"workpro-cabinet-hardware-jig-adjustable-drilling-template-for-handles-and-pulls","title":"WORKPRO Cabinet Hardware Jig, Adjustable Drilling Template for Handles and Pulls","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO Cabinet Hardware Jig is an adjustable drilling template for positioning cabinet handles, pulls, and knobs, with dual metric and imperial scales and drill guides adjustable within 3 in (8 cm).\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMetric and imperial scales with 1 mm\/0.1 inch precision — helps position holes accurately.\u003c\/li\u003e\n\u003cli\u003eTwo adjustable drill guides — set hole spacing for cabinet hardware.\u003c\/li\u003e\n\u003cli\u003eAluminum alloy construction with an oxidized surface — made for corrosion resistance and repeated use.\u003c\/li\u003e\n\u003cli\u003eDisassembles into three components for compact storage — makes the jig easier to put away and carry.\u003c\/li\u003e\n\u003cli\u003eTwo M6 PVC soft pads — help protect furniture surfaces from scratches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen fitting cabinet hardware, consistent hole placement helps keep handles and knobs aligned across drawers and doors. This jig is made for positioning drilling points on drawers, cabinets, door panels, and other carriers, whether you are installing handles, pulls, or knobs.\u003c\/p\u003e\u003ch3\u003eHow does the WORKPRO jig help position cabinet hardware?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO Cabinet Hardware Jig uses dual-scale rulers and pointer-equipped drill guides to help locate drilling points. Its metric and imperial scales provide stated precision of 1 mm\/0.1 inch, while the horizontal and vertical rulers meet a perpendicularity accuracy standard of 1‰. Together, these features support precise positioning when laying out hardware holes.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePointers on both drill guides help identify their positions against the rulers.\u003c\/li\u003e\n\u003cli\u003eThe perpendicularity standard applies to the horizontal and vertical rulers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCan I adjust the hole spacing for different handles and drawers?\u003c\/h3\u003e\u003cp\u003eYes. The WORKPRO Cabinet Hardware Jig has two drill guides that adjust freely within 3 in (8 cm), allowing you to set the spacing between drill holes. A middle nut adjusts the vertical distance for positioning on cabinets or drawers, so you can align the guides to the hardware layout.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the adjustable guides to set the distance between the two drilling points.\u003c\/li\u003e\n\u003cli\u003eThe jig is intended for handles, pulls, and knobs on drawers, cabinets, door panels, and other carriers.\u003c\/li\u003e\n\u003cli\u003eTwo M6 PVC soft pads on the back of the horizontal ruler help prevent scratches on the furniture surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat comes apart, and what is the jig made from?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO Cabinet Hardware Jig separates into a straight ruler with drill guides, an L-shaped ruler, and two drill bits. The bits have a 4 mm diameter. The three separated components can be stored in a small box, making the jig easier to store and carry between projects.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe jig is made entirely from aluminum alloy.\u003c\/li\u003e\n\u003cli\u003eAn oxidized surface treatment supports its stated corrosion resistance and high-strength performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis jig suits DIYers and installers who need to lay out cabinet hardware holes on drawers, cabinets, or door panels and adjust the spacing to match their planned placement. Its guides, dual-scale rulers, and adjustable layout make it a practical fit for positioning handles, pulls, and knobs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What cabinet hardware can the WORKPRO Cabinet Hardware Jig help install?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Cabinet Hardware Jig is designed to position holes for handles, pulls, and knobs on drawers, cabinets, door panels, and other carriers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How far apart can the WORKPRO Cabinet Hardware Jig’s drill guides be adjusted?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Cabinet Hardware Jig has two drill guides that adjust freely within 3 in (8 cm), so you can set the spacing between drilling points.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564854485370,"sku":"B0FCXGGH6Q","price":35.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-cabinet-hardware-jig-front-view.jpg?v=1794671918"},{"product_id":"workpro-3-8-inch-drive-flex-head-ratchet-18-inch-extra-long-handle-72-tooth","title":"WORKPRO 3\/8-Inch Drive Flex Head Ratchet, 18-Inch Extra Long Handle, 72-Tooth","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO 3\/8-inch drive extra long flex head ratchet is made to reach confined work areas, with an 18-inch handle for extended reach and leverage.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e18-inch handle — extends your reach when working around hard-to-access areas.\u003c\/li\u003e\n\u003cli\u003eChrome Molybdenum (Cr-Mo) steel ratchet head — made to withstand high torque without deforming.\u003c\/li\u003e\n\u003cli\u003e72-tooth mechanism and 5-degree swing arc — lets you work with a small amount of clearance for each movement.\u003c\/li\u003e\n\u003cli\u003e180-degree flexible head with a forward\/reverse switch — lets you adjust the head angle and change driving direction.\u003c\/li\u003e\n\u003cli\u003eFor professional mechanics and DIY users — suited to automotive, bicycle, and household repair work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFasteners in corners and narrow spaces can be difficult to reach with a standard-length handle or to turn when there is little room to move. This ratchet is designed for those restricted work areas as well as more open repair settings. Its extended handle provides additional reach and leverage, while the ratcheting mechanism and adjustable head address limited clearance and changing tool angles.\u003c\/p\u003e\u003ch3\u003eWhat kinds of repair work is this ratchet suited to?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO ratchet is designed for mechanical and general repair tasks, including work on cars, bicycles, and household items. It suits both professional mechanics and DIY users who need to reach fasteners in confined areas or work in more open spaces. The 3\/8-inch drive identifies the drive size for compatible sockets; match that size to the sockets used for your task.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAutomotive repair\u003c\/li\u003e\n\u003cli\u003eBicycle maintenance\u003c\/li\u003e\n\u003cli\u003eHousehold repairs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does it help when there is little room to swing the handle?\u003c\/h3\u003e\u003cp\u003eThe 72-tooth ratcheting mechanism operates with a 5-degree swing arc, so the handle needs only a small movement to engage during work in a tight area. This can reduce how often you need to reposition the tool where clearance is limited. The 18-inch handle also gives extended reach and leverage for accessing hard-to-reach corners.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e72 teeth in the ratcheting mechanism\u003c\/li\u003e\n\u003cli\u003e5-degree working swing arc\u003c\/li\u003e\n\u003cli\u003eExtended handle reach for restricted work areas\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCan I change the head angle and switch between tightening and loosening?\u003c\/h3\u003e\u003cp\u003eYes. The head pivots through 180 degrees, and the directional switch changes the ratchet between forward and reverse. Adjusting the head angle helps position the handle for the work area, while the direction control lets you tighten or loosen fasteners.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e180-degree flexible head movement\u003c\/li\u003e\n\u003cli\u003eForward and reverse driving directions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat is the ratchet head made from?\u003c\/h3\u003e\u003cp\u003eThe ratchet head is made from Chrome Molybdenum (Cr-Mo) steel, a high-strength material selected to handle high torque without deformation. That construction makes the head suitable for demanding mechanical work in professional and DIY settings. The material claim applies to the ratchet head; no handle material is specified here.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCr-Mo steel ratchet head\u003c\/li\u003e\n\u003cli\u003eDesigned for high-torque mechanical tasks\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis WORKPRO ratchet is a practical fit for mechanics and DIY users who need extended reach, controlled movement in tight clearances, and a head that can be repositioned for different working angles. It is intended for repair work on vehicles, bicycles, and household items, with its 3\/8-inch drive suited to matching sockets.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What drive size does the WORKPRO extra long flex head ratchet use?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO extra long flex head ratchet has a 3\/8-inch drive. Match the drive size to the sockets used for your repair task.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the WORKPRO flex head ratchet change direction and angle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The WORKPRO flex head ratchet pivots through 180 degrees and switches between forward and reverse for tightening or loosening fasteners.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564854550906,"sku":"B0DJ2GCRFL","price":45.97,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-flex-head-ratchet-front-view.jpg?v=1794671927"},{"product_id":"workpro-linesman-pro-8-inch-screw-extractor-pliers-with-non-slip-jaws","title":"WORKPRO Linesman PRO 8-Inch Screw Extractor Pliers with Non-Slip Jaws","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Linesman PRO Screw Extractor Pliers are 8 in (20.32 cm) combination pliers designed to grip and turn damaged fasteners, with unique non-slip jaws and chrome vanadium steel construction.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUnique non-slip jaws — squeeze and turn crushed, rusted, fixed, or special screws.\u003c\/li\u003e\n\u003cli\u003eApproximate screw head diameter range: 0.97–0.41 in (2.46–10.5 mm) — covers the fastener sizes specified for removal.\u003c\/li\u003e\n\u003cli\u003eChrome vanadium steel processed with five boost crafts — built for hardness and durability, with hardness up to 55 HRC after heat treatment and up to 65 HRC after high-frequency treatment.\u003c\/li\u003e\n\u003cli\u003eDesigned for bottle handling as well as fasteners — can also be used to remove gas cans and sort soy sauce and plastic bottles.\u003c\/li\u003e\n\u003cli\u003eHand-friendly ergonomic body — shaped with user comfort in mind.\u003c\/li\u003e\n\u003cli\u003eMaterials comply with environmental protection requirements — products are tested for heavy metals and chemicals.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eDamaged or rusted fasteners can be difficult to grip and turn with conventional pliers. WORKPRO makes these linesman-style pliers for jobs that call for squeezing and turning a screw head, including crushed, fixed, and special screws. Their stated uses also extend to handling gas cans and sorting bottles, giving the tool applications beyond screw removal.\u003c\/p\u003e\n\u003ch3\u003eWhat can these pliers remove or handle?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO Linesman PRO Screw Extractor Pliers are designed to squeeze and turn crushed, rusted, fixed, and special screws. Their unique non-slip jaws provide the gripping feature intended for these fastener-removal tasks. The tool can also be used for removing gas cans and sorting soy sauce bottles and plastic bottles.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLinesman PRO and screw-remover combination plier design.\u003c\/li\u003e\n\u003cli\u003eSuitable for the listed bottle-handling tasks as well as fastener work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat screw sizes are these pliers made for?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO Linesman PRO Screw Extractor Pliers are specified for screw head diameters of approximately 0.97–0.41 in (2.46–10.5 mm). The listed thread-size ranges are truss screws M2–4 and pan screws M1.6–5. Compare the screw head and type with these ranges when choosing the tool for a particular fastener.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTruss screw range: M2–4.\u003c\/li\u003e\n\u003cli\u003ePan screw range: M1.6–5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat are the pliers made of, and how are they finished?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO Linesman PRO Screw Extractor Pliers are made from heavy-duty chrome vanadium steel and receive five boost crafts intended to improve hardness and durability. Heat-treated hardness reaches up to 55 HRC, while high-frequency treatment reaches up to 65 HRC. The product features rust protection, and its ergonomic body is designed to be hand-friendly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested for heavy metals and chemicals.\u003c\/li\u003e\n\u003cli\u003eTotal content of three o-phenols is below 1,000 ppm.\u003c\/li\u003e\n\u003cli\u003eManufactured by a globally recognized tool supplier focused on consistent performance and reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese pliers suit people who need a compact linesman-style tool for gripping damaged fasteners and who may also use it for the stated gas-can and bottle-sorting tasks. Their 8-inch length, specified screw ranges, chrome vanadium steel construction, and non-slip jaws define the tool’s intended fit and use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What screw sizes can WORKPRO Linesman PRO Screw Extractor Pliers remove?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Linesman PRO Screw Extractor Pliers are specified for screw head diameters of approximately 0.97–0.41 in (2.46–10.5 mm), including truss screws M2–4 and pan screws M1.6–5.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What can WORKPRO Linesman PRO Screw Extractor Pliers be used for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Linesman PRO Screw Extractor Pliers are designed to squeeze and turn crushed, rusted, fixed, or special screws. They can also be used to remove gas cans and sort soy sauce and plastic bottles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564854845818,"sku":"B0C49NS45J","price":32.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-linesman-pliers-front-view.jpg?v=1794671948"},{"product_id":"workpro-aviation-tin-snips-8-inch-straight-cut-with-dual-lever-design","title":"WORKPRO Aviation Tin Snips, 8-Inch Straight Cut with Dual-Lever Design","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO 8-inch aviation tin snips are designed for straight cuts in metal and other listed materials, with the cutting force of 10-inch snips in a smaller tool.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompact 8-inch design with the cutting force of 10-inch snips — get that cutting force in a smaller tool.\u003c\/li\u003e\n\u003cli\u003eReduced handle opening distance — use 10% less effort than with the 10-inch model.\u003c\/li\u003e\n\u003cli\u003eMetal safety lock and self-locking nuts — keep the jaws closed and help prevent accidental detachment.\u003c\/li\u003e\n\u003cli\u003eDual-lever mechanism and compact pivot — generate shearing force with less effort.\u003c\/li\u003e\n\u003cli\u003eSerrated cutting edge — helps keep material from slipping during a cut.\u003c\/li\u003e\n\u003cli\u003eErgonomic TRP handle with an outward arc — provides a grip with anti-slip force.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese straight-cut aviation snips are made for cutting jobs where controlled shearing through metal sheet or other compatible materials is needed. Their compact size and leverage-focused design support tasks that call for cutting force without the larger handle opening of a 10-inch model.\u003c\/p\u003e\u003ch3\u003eWhat materials can WORKPRO aviation tin snips cut?\u003c\/h3\u003e\u003cp\u003eThey cut 18-gauge (1.2 mm) cold-rolled steel and 22-gauge (0.8 mm) stainless steel. The snips are also intended for metal sheets, thin PVC pipes, square steel pipes and keels, giving them uses across a range of cutting tasks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse them on cold-rolled steel up to 18 gauge (1.2 mm).\u003c\/li\u003e\n\u003cli\u003eThey can cut stainless steel up to 22 gauge (0.8 mm).\u003c\/li\u003e\n\u003cli\u003eOther stated applications include thin PVC pipe, square steel pipe and keels.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does the compact cutting design work?\u003c\/h3\u003e\u003cp\u003eA double-lever design with a compact pivot creates shearing force while reducing the effort needed to cut. The 8-inch tool delivers the cutting force of a 10-inch version, and its shorter handle opening distance is designed to lower effort by 10% compared with that model.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe serrated edge grips material to help limit slipping and support precise cuts.\u003c\/li\u003e\n\u003cli\u003eThe snips are designed for straight cutting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow do the handle and safety lock help during use?\u003c\/h3\u003e\u003cp\u003eA metal safety lock secures the jaws closed, while self-locking nuts help keep the connection secure and prevent accidental detachment. The ergonomic TRP handle has an outward arc for grip and anti-slip force.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe tri-color handle is easy to identify.\u003c\/li\u003e\n\u003cli\u003eA hole at the handle end supports hanging storage and portability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWORKPRO aviation tin snips suit users making straight cuts in metal sheet, specified steel gauges, thin PVC pipe, square steel pipe or keels. Their 8-inch size, leverage design and stated material capacities make them a fit for these cutting tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What thickness of steel can WORKPRO aviation tin snips cut?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO aviation tin snips can cut 18-gauge (1.2 mm) cold-rolled steel and 22-gauge (0.8 mm) stainless steel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How can WORKPRO aviation tin snips be stored?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO aviation tin snips have a hole at the end of the handle for hanging storage and portability.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564854681978,"sku":"B0BQB8PLWK","price":34.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-aviation-tin-snips-front-view.jpg?v=1794671949"},{"product_id":"workpro-8-inch-high-leverage-diagonal-pliers-with-beveled-edges-and-non-slip-handles","title":"WORKPRO 8-Inch High-Leverage Diagonal Pliers with Beveled Edges and Non-Slip Handles","description":"\u003cp\u003eWORKPRO 8-inch (20.32 cm) high-leverage diagonal pliers are made for cutting wire, including steel wire up to 5 mm, with a design intended to reduce cutting effort.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHeat-treated chrome vanadium steel with a black polished finish and clear electrophoretic coating — provides strength and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eBeveled cutting edges — support precise cuts in tight spaces and when careful handling matters.\u003c\/li\u003e\n\u003cli\u003eHigh pivot point and long handles — deliver increased cutting power and save 30% more effort than regular cutting pliers.\u003c\/li\u003e\n\u003cli\u003eTPR ergonomic handles — provide a comfortable, non-slip grip to help reduce hand fatigue and improve control during extended use.\u003c\/li\u003e\n\u003cli\u003eSuitable for several wire materials, cables and small fasteners — covers a range of toolbox and household cutting tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese diagonal cutters are designed for jobs that call for controlled cutting rather than a broad, imprecise approach. Their beveled edges are suited to close work, while the leverage-focused handle and pivot design helps when cutting tasks require more force. They can be used for household tasks as well as general toolbox work.\u003c\/p\u003e\n\u003ch3\u003eWhat can the WORKPRO diagonal pliers cut?\u003c\/h3\u003e\n\u003cp\u003eThey are suitable for copper, brass, iron, aluminum and steel wires, as well as cables and small fasteners. This range makes them useful for different cutting jobs without limiting them to a single wire material.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse them for copper, brass, iron, aluminum or steel wire.\u003c\/li\u003e\n\u003cli\u003eThey can also cut cables and small fasteners.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does the cutting design help with close or forceful cuts?\u003c\/h3\u003e\n\u003cp\u003eA high pivot point paired with long handles increases leverage and cutting power. WORKPRO states that this design saves 30% more effort compared with regular cutting pliers. The beveled edge is intended to help make precise cuts in tight spaces and during fine handling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSteel wire cutting capacity: up to 5 mm.\u003c\/li\u003e\n\u003cli\u003eThe beveled cutting edge is suited to precise work in confined spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat are the pliers made from, and how do the handles feel?\u003c\/h3\u003e\n\u003cp\u003eThe cutting pliers use heat-treated chrome vanadium steel, with a black polished finish and clear electrophoretic coating for corrosion resistance. Their TPR handles have an ergonomic shape and a non-slip surface, supporting grip and control during longer tasks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe steel construction is designed for strength and durability.\u003c\/li\u003e\n\u003cli\u003eThe handle material is TPR.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese WORKPRO diagonal pliers suit DIY users and household toolboxes needing a wire cutter for varied materials, cables and small fasteners, including jobs where precise cuts and leverage are useful. Their 8-inch format, beveled cutting edge and high-leverage design bring those functions together in one cutting tool.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What materials can WORKPRO 8-inch diagonal pliers cut?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO 8-inch diagonal pliers cut copper, brass, iron, aluminum and steel wires, as well as cables and small fasteners.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How thick a steel wire can WORKPRO 8-inch diagonal pliers cut?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO 8-inch diagonal pliers cut steel wire up to 5 mm thick.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564863234426,"sku":"B0BLR6BC46","price":30.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-diagonal-pliers-full-tool-view.jpg?v=1794672431"},{"product_id":"workpro-electrician-scissors-6-4-inch-stainless-steel-shears-for-wire-stripping","title":"WORKPRO Electrician Scissors, 6.4-Inch Stainless Steel Shears for Wire Stripping","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Stainless Electricians Scissors are 6.4-inch (16.3 cm) electrician shears for cutting, stripping wire, and crimping cable terminals, with 3.8 mm-thick blades.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-hardness stainless steel blades with non-slip serrated edges — support precise, efficient cutting.\u003c\/li\u003e\n\u003cli\u003eCutting capacity up to 12 AWG wire or cable and 1\/0 AWG soft cable — suits a range of electrical cable tasks.\u003c\/li\u003e\n\u003cli\u003eCutting, wire stripping, and cable-terminal crimping functions — bring three cable-preparation tasks into one tool.\u003c\/li\u003e\n\u003cli\u003eNon-slip TPR handles with a hanging hole — provide a comfortable grip and a way to hang the shears.\u003c\/li\u003e\n\u003cli\u003eProtective sheath with belt clip — covers the blade and supports pocket carry and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePreparing electrical wire can involve more than making a cut: cable may also need stripping or a terminal crimp. These electrician shears combine those functions for hands-on electrical work, while their stated cutting capacities help you judge whether they suit the wire or cable you are handling.\u003c\/p\u003e\n\u003ch3\u003eWhat can WORKPRO electrician scissors do?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO electrician scissors cut wire and cable, strip wire, and crimp cable terminals. Their stainless steel blades have high hardness and non-slip serrated edges, with a blade thickness of 3.8 mm. This combination is designed for precise and efficient cutting as part of cable preparation.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse the shears for the listed tasks of cutting, stripping, and terminal crimping.\u003c\/li\u003e\n\u003cli\u003eThe serrated blade edges are non-slip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat wire and cable sizes can they cut?\u003c\/h3\u003e\n\u003cp\u003eThese shears cut wire or cable up to 12 AWG and soft cable up to 1\/0 AWG. The stated soft-cable capacity is a diameter of 8.5 mm \/ 0.3249 in, with a cross-section of 50 mm². Compare your cable type and size with these limits when choosing the tool for a job.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWire or cable capacity: up to 12 AWG.\u003c\/li\u003e\n\u003cli\u003eSoft-cable capacity: up to 1\/0 AWG.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eAre the handles and sheath suited to carrying the shears?\u003c\/h3\u003e\n\u003cp\u003eThe handles are made from TPR and have a non-slip surface for a comfortable hold. A hanging hole gives you an option for hanging the shears when they are not in use. The included sheath covers the blade and is designed to protect it from rust and help prevent user injury.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA belt clip on the sheath supports convenient carry.\u003c\/li\u003e\n\u003cli\u003eThe sheathed tool can be stored in a pocket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese WORKPRO electrician shears are suited to people who need one tool for cutting wire and cable, stripping wire, and crimping cable terminals. Their stated wire and soft-cable capacities make them a practical choice when those sizes match the work at hand. The TPR grip, hanging hole, and protective sheath support handling, hanging, and carrying the tool.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire sizes can WORKPRO electrician scissors cut?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO electrician scissors cut wire or cable up to 12 AWG and soft cable up to 1\/0 AWG, with a stated soft-cable diameter of 8.5 mm \/ 0.3249 in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tasks can WORKPRO electrician scissors perform?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO electrician scissors cut wire and cable, strip wire, and crimp cable terminals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564863267194,"sku":"B091C45QXL","price":37.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-electrician-scissors-front-view.jpg?v=1794672429"},{"product_id":"workpro-drill-bit-extension-set-4-piece-2-3-8-to-12-in-magnetic-snap-ring-holder","title":"WORKPRO Drill Bit Extension Set, 4-Piece, 2-3\/8 to 12 in, Magnetic Snap-Ring Holder","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO 4-piece drill bit extension set extends compatible bits for drilling and screwdriving, with four reach options and a magnetic, snap-ring locking holder.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour extensions: 2-3\/8 in (60.3 mm), 4 in (10.2 cm), 6 in (15.2 cm) and 12 in (30.5 cm) — choose a reach suited to the task.\u003c\/li\u003e\n\u003cli\u003eMagnet and snap ring lock — help keep the bit secured in the holder.\u003c\/li\u003e\n\u003cli\u003e1\/4 in (6.35 mm) hex connection — fits insert bits and 1\/4-inch hex bits.\u003c\/li\u003e\n\u003cli\u003eHeat-treated chrome vanadium steel — provides strength for repeated tool use.\u003c\/li\u003e\n\u003cli\u003eAdditional aluminum sleeve — lets you support the outer sleeve by hand while it rotates.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eReaching a screw or drilling point can be difficult when the tool body cannot get close to the work area. This set provides extensions in different lengths for home projects and professional jobs, with a holder designed for bit retention and controlled use. Its compatible hex format also accommodates a range of screw, nut and hex-shaft tasks.\u003c\/p\u003e\u003ch3\u003eWhat lengths are included in the WORKPRO extension set?\u003c\/h3\u003e\u003cp\u003eThe set includes four drill bit extensions measuring 2-3\/8 in (60.3 mm), 4 in (10.2 cm), 6 in (15.2 cm) and 12 in (30.5 cm). The range gives you different extension lengths for varied access needs, from straightforward home projects to more involved work. Choose the length that suits the distance between your tool and the fastener or drilling point.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour extension lengths in one set.\u003c\/li\u003e\n\u003cli\u003eDesigned for a range of home and professional tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does the bit holder secure bits?\u003c\/h3\u003e\u003cp\u003eThe magnetic holder combines a built-in magnet with a snap ring lock to hold screwdriver bits and a drill securely. To change a bit, slide the locking mechanism at the head of the quick-release holder. The additional aluminum sleeve can be supported by hand during use without affecting its rotation, helping you maintain control.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDual retention: built-in magnet and snap ring.\u003c\/li\u003e\n\u003cli\u003eQuick bit changes through the sliding lock mechanism.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich bits and tools does the WORKPRO set fit?\u003c\/h3\u003e\u003cp\u003eThe extension uses a 1\/4-inch hex connection and works with insert bits and 1\/4-inch hex bits. This universal compatibility makes it useful for screw, nut and hexagonal-shaft applications. The extensions are made from heat-treated chrome vanadium steel, which provides added strength and supports lasting durability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with insert and 1\/4-inch hex bits.\u003c\/li\u003e\n\u003cli\u003eFor drilling and screwdriving tasks involving screws, nuts or hexagonal shafts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe WORKPRO set suits DIYers and professionals who need to extend bit reach and switch among several extension lengths. Its magnetic, snap-ring holder, hand-supportable aluminum sleeve and four size options make it a practical choice for varied drilling and screwdriving access needs.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What lengths come in the WORKPRO 4-piece drill bit extension set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO drill bit extension set includes extensions measuring 2-3\/8 in, 4 in, 6 in and 12 in.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which bits fit the WORKPRO drill bit extension set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO drill bit extension set has a 1\/4-inch hex connection and fits insert bits and 1\/4-inch hex bits.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564956950906,"sku":"B0FZZJ9MS6","price":28.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-drill-bit-extension-set-front-view.jpg?v=1794676522"},{"product_id":"workpro-magnetic-screwdriver-set-10-piece-blue-kit-with-pouch-and-magnetizer","title":"WORKPRO Magnetic Screwdriver Set, 10-Piece Blue Kit with Pouch and Magnetiser","description":"\u003cp\u003e\u003cstrong\u003eThe blue WORKPRO 10-piece magnetic screwdriver set is made for DIY, home maintenance and assembly tasks, with five flat-head and five Phillips screwdrivers plus a magnetizer and demagnetizer.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 screwdriver sizes — choose from flat-head and Phillips options for home, furniture, automotive and appliance tasks.\u003c\/li\u003e\n\u003cli\u003eHeat-treated chrome vanadium steel — provides strength and toughness, with resistance to rust and corrosion.\u003c\/li\u003e\n\u003cli\u003eMagnetic, blackened tips — help hold screws, and the included tool lets you adjust screwdriver magnetism.\u003c\/li\u003e\n\u003cli\u003eErgonomic PP and TPR handles — designed for grip and comfort, with printed specifications for quick identification.\u003c\/li\u003e\n\u003cli\u003eZippered carrying pouch with elastic strap — keeps the set together and organized for carrying or storage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eKeeping several screwdriver sizes together can make routine fixes and assembly work easier to manage. This set brings flat-head and Phillips drivers together for DIY projects, home maintenance, furniture assembly, automotive work and appliances. The pouch helps keep the tools organized between tasks, while the printed specifications make it easier to identify a driver by its size.\u003c\/p\u003e\n\u003ch3\u003eWhat screwdriver sizes are included?\u003c\/h3\u003e\n\u003cp\u003eThe set includes five flat-head screwdrivers and five Phillips screwdrivers in the sizes below.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFlat-head: 3X75, 4X100, 5X125, 6X38 and 6X100.\u003c\/li\u003e\n\u003cli\u003ePhillips: PH0X75, PH1X100, PH1X125, PH2X38 and PH2X100.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHaving both tip styles in one kit gives you options for different screw heads across everyday repair and assembly jobs. Use the printed size specifications to identify the driver you need.\u003c\/p\u003e\n\u003ch3\u003eHow do the magnetic screwdriver tips work?\u003c\/h3\u003e\n\u003cp\u003eEach screwdriver has a magnetic tip, and the included 2-in-1 tool lets you strengthen or weaken its magnetism.\u003c\/p\u003e\n\u003cp\u003eThe screwdriver tips are specially blackened to improve magnetic grip on screws. To adjust the magnetism, slide a screwdriver into the corresponding hole in the magnetizer and demagnetizer tool.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse the magnetizer hole to strengthen magnetism.\u003c\/li\u003e\n\u003cli\u003eUse the demagnetizer hole to weaken magnetism.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat are the handles and screwdriver shafts made from?\u003c\/h3\u003e\n\u003cp\u003eThe handles combine PP and TPR in an ergonomic design, while the screwdriver shafts use heat-treated chrome vanadium steel.\u003c\/p\u003e\n\u003cp\u003eThe handle is designed to provide grip and comfort during use. The steel is described as offering greater strength and toughness than most carbon steel, along with resistance to rust and corrosion.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA built-in hang hole provides another way to store the screwdrivers.\u003c\/li\u003e\n\u003cli\u003ePrinted specifications help distinguish the tools by size.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow can I carry and organize the set?\u003c\/h3\u003e\n\u003cp\u003eThe set comes with a zippered carrying pouch and an elastic strap to keep the screwdrivers organized.\u003c\/p\u003e\n\u003cp\u003eThe pouch is made for carrying the kit between tasks or keeping the tools together in storage. The elastic strap holds the screwdrivers in place inside the pouch.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe pouch closes with a zipper.\u003c\/li\u003e\n\u003cli\u003eThe elastic strap helps keep the tools neatly arranged.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis WORKPRO set suits DIYers and anyone handling home maintenance, furniture assembly, automotive or appliance tasks who wants flat-head and Phillips drivers in one organized kit. Its range of 10 sizes, magnetic tips and included magnetizer and demagnetizer bring those functions together in a zippered pouch.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sizes come in the WORKPRO 10-piece magnetic screwdriver set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO magnetic screwdriver set includes five flat-head sizes: 3X75, 4X100, 5X125, 6X38 and 6X100, plus five Phillips sizes: PH0X75, PH1X100, PH1X125, PH2X38 and PH2X100.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I adjust the magnetism of the WORKPRO screwdrivers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The WORKPRO magnetic screwdriver set includes a 2-in-1 magnetizer and demagnetizer; slide a screwdriver into the corresponding hole to strengthen or weaken its magnetism.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564968747386,"sku":"B0D529YC3S","price":36.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-magnetic-screwdriver-set-front-view.jpg?v=1794677015"},{"product_id":"workpro-long-nose-slip-joint-pliers-8-inch-cr-v-steel-with-adjustable-jaws","title":"WORKPRO Long Nose Slip Joint Pliers, 8-Inch CR-V Steel with Adjustable Jaws","description":"\u003cp\u003eWORKPRO 8-Inch Long Nose Slip Joint Pliers combine CR-V steel construction with a two-position slip joint for gripping, bending, winding and cutting workpieces in tight spaces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo slip-joint jaw positions — adjust the opening to handle different-sized workpieces.\u003c\/li\u003e\n\u003cli\u003eLong, narrow nose — reach into confined areas for repair and assembly tasks.\u003c\/li\u003e\n\u003cli\u003eThree serrated jaw zones — grip a range of object shapes for tightening, loosening and clamping.\u003c\/li\u003e\n\u003cli\u003eWire-cutting shear — cuts iron wire under 1.6 mm and soft copper wire.\u003c\/li\u003e\n\u003cli\u003eCR-V steel body with special heat treatment — made for strength, durability and long service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese pliers bring long-nose access and adjustable slip-joint openings together in one hand tool. They are suited to work where the jaws need to reach into a narrow space, grip different-sized parts or handle wire, including automotive repair, household maintenance, professional maintenance and industrial assembly.\u003c\/p\u003e\n\u003ch3\u003eHow do the two jaw positions help with different jobs?\u003c\/h3\u003e\n\u003cp\u003eThe slip joint switches between two jaw positions to provide a wider, more flexible range of openings. This lets you move between smaller workpieces such as thin wire and larger ones such as bolts without changing tools. The slender nose also reaches into narrow, hard-to-access areas.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse the jaws for clamping, bending and winding tasks.\u003c\/li\u003e\n\u003cli\u003eThe widened head adds stabilizing force when clamping items.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat kind of grip do the jaws provide?\u003c\/h3\u003e\n\u003cp\u003eThe jaws have three serration zones, with mesh serrations at the nose and fine and heavy serrations farther inward. This varied pattern is made to grip different shapes when tightening, loosening or holding objects. The 8-inch (20.32 cm) pliers have neat jaws and plastic-dipped handles shaped for a comfortable, non-slip hold that can help reduce hand fatigue.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe mesh-textured nose is designed for a more stable grip.\u003c\/li\u003e\n\u003cli\u003eChoose the fine or heavy serrations farther along the jaws to suit the object being held.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan these pliers cut wire, and where can they be used?\u003c\/h3\u003e\n\u003cp\u003eA cutting shear at the bottom of the jaws cuts iron wire with a diameter under 1.6 mm and soft copper wire. The pliers are intended for varied maintenance and operation tasks, from household repairs to automotive work and industrial assembly.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse the long nose for gripping and manipulating items in restricted spaces.\u003c\/li\u003e\n\u003cli\u003eCombine clamping, bending, winding and wire cutting tasks in one tool.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWORKPRO 8-Inch Long Nose Slip Joint Pliers suit home users, professional maintenance workers and industrial assemblers who need adjustable jaw openings and long-nose access in one tool. Their two-position joint, serrated jaws and integrated wire shear support a range of gripping and wire-handling tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What wire can WORKPRO 8-Inch Long Nose Slip Joint Pliers cut?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO 8-Inch Long Nose Slip Joint Pliers have a cutting shear for iron wire under 1.6 mm in diameter and soft copper wire.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Do WORKPRO 8-Inch Long Nose Slip Joint Pliers have adjustable jaw positions?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. WORKPRO 8-Inch Long Nose Slip Joint Pliers have a slip joint with two jaw positions, providing a wider range of openings for different-sized workpieces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57564980314490,"sku":"B0FFMMM7K1","price":30.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-long-nose-pliers-front-view.jpg?v=1794677493"},{"product_id":"workpro-miter-shears-with-4-anvils-and-replacement-blade-for-angled-trim-cuts","title":"WORKPRO Miter Shears with 4 Anvils and Replacement Blade for Angled Trim Cuts","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Miter Shears are a hand-operated trim and quarter round cutter for making angled joints, with an adjustable 45°–135° cutting range and four interchangeable anvils.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable 45°–135° cutting angles — make miter cuts for trim and corner joints without setting up a bulky power saw.\u003c\/li\u003e\n\u003cli\u003eFour interchangeable aluminum alloy anvils — adapt the tool to different cutting shapes and tasks.\u003c\/li\u003e\n\u003cli\u003eFor lightweight materials — cut PVC strips, plastic trim, molding, quarter round and softwood pieces.\u003c\/li\u003e\n\u003cli\u003eIncludes a replacement blade, hex key and storage bag — keep the listed tool accessories together.\u003c\/li\u003e\n\u003cli\u003eSafety lock and ergonomic non-slip handle — help keep the shears closed in storage and support grip and cutting control.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor trim installation and home repairs, getting a clean cut at a corner can mean setting up a power saw or changing tools between different cutting jobs. WORKPRO Miter Shears offer a hand-operated option for lightweight trim and DIY work, with interchangeable anvils for different shapes. They are made for cutting lightweight materials, not metal or stainless steel.\u003c\/p\u003e\u003ch3\u003eWhat materials can WORKPRO Miter Shears cut?\u003c\/h3\u003e\u003cp\u003eThey are designed to cut lightweight materials such as PVC strips, plastic trim, molding, quarter round and softwood pieces. Use them for flooring details, decorative trim installation and everyday repairs where these materials are suitable. The hand-operated design provides an alternative to setting up a bulky electric saw for these cutting tasks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuitable examples include PVC trunking and softwood dowels.\u003c\/li\u003e\n\u003cli\u003eNot suitable for cutting metal or stainless steel.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow do the four anvils change the cutting options?\u003c\/h3\u003e\u003cp\u003eThe kit has four interchangeable aluminum alloy anvils: an adjustable multi-angle anvil, a flat anvil, a 90° anvil and a dowel anvil. Choose the anvil that suits the material and cut, then use the adjustable option to set an angle from 45° to 135°. This range supports angled cuts for decorative trim and corner joints.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe flat, 90° and dowel anvils provide different cutting setups.\u003c\/li\u003e\n\u003cli\u003eThe adjustable anvil covers angles from 45° through 135°.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat is included, and how is the tool handled?\u003c\/h3\u003e\u003cp\u003eThe kit contains the miter shears, a stainless steel replacement blade with a protective sheath, a hex key for blade and anvil changes, and a storage bag. A safety lock helps prevent the shears from opening accidentally during storage or transportation. The ergonomic non-slip handle is designed to provide a comfortable grip, reduce hand fatigue and improve cutting control.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the hex key for blade and anvil changes.\u003c\/li\u003e\n\u003cli\u003eThe replacement blade comes with a protective sheath.\u003c\/li\u003e\n\u003cli\u003eStore and carry the tool and accessories in the included bag.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese shears suit DIY users and professionals working with lightweight trim, quarter round, PVC and softwood pieces, especially when a hand tool is useful for corner cuts and repair tasks. They are intended for those materials rather than metal cutting, with four anvil options and an adjustable miter range in one tool.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included with WORKPRO Miter Shears?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Miter Shears kit includes the shears, a stainless steel replacement blade with protective sheath, a hex key for blade and anvil changes, and a storage bag.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can WORKPRO Miter Shears cut metal?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: No. WORKPRO Miter Shears are designed for lightweight materials such as PVC, plastic trim, molding, quarter round and softwood, not metal or stainless steel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57565023699322,"sku":"B0GC5FZ1Y8","price":49.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-miter-shears-front-view.jpg?v=1794679052"},{"product_id":"workpro-kids-unicorn-led-lanterns-2-pack-with-5-color-modes-and-360-glow","title":"WORKPRO Kids Unicorn LED Lanterns, 2-Pack with 5 Colour Modes and 360° Glow","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO’s two-pack unicorn LED lanterns give kids portable night lighting for bedrooms, camping and celebrations, with five color modes and a warm-white 360° glow.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWarm-white light reaches up to 10 feet — provides a soft glow around the lantern.\u003c\/li\u003e\n\u003cli\u003eABS construction withstands a drop of up to 3.28 feet — made for everyday handling.\u003c\/li\u003e\n\u003cli\u003eEach lantern comes with three AAA batteries preloaded — the included batteries last about four hours, with runtime varying by battery.\u003c\/li\u003e\n\u003cli\u003ePull up to turn on and push down to turn off — a simple control for kids to operate.\u003c\/li\u003e\n\u003cli\u003eA lanyard supports carrying and outdoor use — keep the lantern close on family outings.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA small portable light can be useful at bedtime, at a campsite or as part of a holiday celebration. WORKPRO’s unicorn-shaped lantern combines a kid-friendly design with multiple lighting options, so it can serve as a night light, a camping lantern or a colorful party decoration.\u003c\/p\u003e\n\u003ch3\u003eWhat lighting options does the unicorn lantern offer?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO’s lantern has five RGB lighting modes: warm white, red, green, blue and colorful. Warm white is 2700–3300K and creates a soft 360° glow with a range of up to 10 feet. Choose from a calm warm-white setting or the other color options for a different look at bedtime or during a celebration.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFive modes: warm white, red, green, blue and colorful.\u003c\/li\u003e\n\u003cli\u003eWarm-white color temperature: 2700–3300K.\u003c\/li\u003e\n\u003cli\u003e360° warm-white illumination.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do you turn it on, and what safety features does it have?\u003c\/h3\u003e\n\u003cp\u003ePull the lantern up to switch it on and push it down to switch it off. Its structure is made for repeated operation over thousands of uses. The battery compartment is fastened with screws to help prevent poor battery contact or exposure; incorrect battery insertion will not cause leakage or safety hazards.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePush-pull operation for switching the light on and off.\u003c\/li\u003e\n\u003cli\u003eScrew-secured battery compartment.\u003c\/li\u003e\n\u003cli\u003eNot suitable for children under 3 years old because it contains small parts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat comes in the set, and where can the lanterns be used?\u003c\/h3\u003e\n\u003cp\u003eThe set contains two unicorn lanterns, each measuring 3.15 × 4.72 inches (8 × 12 cm) and weighing 0.30 lb (0.14 kg). Each has three AAA batteries preloaded, and the included batteries provide about four hours of runtime; actual runtime varies by battery. Use the lights indoors as bedroom night lights or party decorations, or take them outdoors for camping. The lanyard makes each lantern easier to carry, and the lights can also hang on a Christmas tree.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo LED lanterns in the set.\u003c\/li\u003e\n\u003cli\u003eEach lantern measures 3.15 × 4.72 inches (8 × 12 cm).\u003c\/li\u003e\n\u003cli\u003eSuitable for Christmas, Halloween and birthday celebrations.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWORKPRO’s unicorn lantern set suits families looking for portable children’s lighting for bedtime, outdoor outings or seasonal decorations. The two compact lights combine five color modes, simple push-pull operation and a carry lanyard for indoor and outdoor use.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many lanterns and batteries are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO unicorn kids lantern set includes two LED lanterns, each with three AAA batteries preloaded. The included batteries last about four hours, with runtime varying by battery.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How does the WORKPRO unicorn kids lantern turn on?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Pull the WORKPRO unicorn kids lantern up to turn it on and push it down to turn it off. It has five lighting modes: warm white, red, green, blue and colorful.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57566040916346,"sku":"B0F8PVRTG7","price":37.6,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-unicorn-kids-lantern-front-view.jpg?v=1794683379"},{"product_id":"workpro-4-piece-snap-ring-pliers-set-with-cr-v-steel-jaws-and-storage-pouch","title":"WORKPRO 4-Piece Snap Ring Pliers Set with CR-V Steel Jaws and Storage Pouch","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO 4-piece snap ring pliers set is made for installing and removing retaining rings, with hardened CR-V steel tools and precision-machined 0.07-inch (1.78 mm) tips.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHardened CR-V steel with a polished, electrophoretic-coated black finish — gives each tool a defined, corrosion-resistant finish.\u003c\/li\u003e\n\u003cli\u003eFour jaw styles — choose from internal and external straight-jaw or bent-jaw pliers.\u003c\/li\u003e\n\u003cli\u003eTips fit specified internal and external retaining ring sizes — helps match the tool to the ring.\u003c\/li\u003e\n\u003cli\u003eSpring-loaded, bi-material ergonomic handles — support control and a secure, comfortable grip.\u003c\/li\u003e\n\u003cli\u003e600D polyester roll-up pouch with cover and special pockets — keeps the tools organized and portable.\u003c\/li\u003e\n\u003cli\u003eDesigned for retaining rings and other assembly tasks — offers holding power and repositioning during fastening and gluing work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRetaining-ring work calls for pliers that suit the ring’s position and size. This set brings four jaw configurations together for internal and external rings, making it useful for installation and removal tasks as well as assembly, fastening, and gluing work where holding and repositioning are needed. The pouch provides a way to keep the tools together between jobs.\u003c\/p\u003e\u003ch3\u003eWhich retaining ring sizes do the tips fit?\u003c\/h3\u003e\u003cp\u003eThe 0.07-inch (1.78 mm) precision-machined tips are designed for internal retaining rings from 1-1\/16 in (26.99 mm) to 1-3\/4 in (44.45 mm), and external rings from 15\/16 in (23.81 mm) to 1-7\/16 in (36.51 mm). Compare your ring’s size and whether it is internal or external with these ranges when choosing a tool.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal ring range: 1-1\/16 to 1-3\/4 inches.\u003c\/li\u003e\n\u003cli\u003eExternal ring range: 15\/16 to 1-7\/16 inches.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat pliers are included in the set?\u003c\/h3\u003e\u003cp\u003eThe set contains four 7-inch (17.78 cm) snap ring pliers: internal straight-jaw, external straight-jaw, internal bent-jaw, and external bent-jaw. Having both straight and bent jaws lets you select a configuration suited to the ring and access needed for the task.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInternal straight-jaw pliers.\u003c\/li\u003e\n\u003cli\u003eExternal straight-jaw pliers.\u003c\/li\u003e\n\u003cli\u003eInternal and external bent-jaw pliers.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow are the tools made and stored?\u003c\/h3\u003e\u003cp\u003eEach tool is made from hardened CR-V steel and has a fully polished, electrophoretic-coated black finish. Spring-loaded, bi-material handles are designed to provide control and a comfortable, secure hold while using the pliers.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompact roll-up format for storage.\u003c\/li\u003e\n\u003cli\u003eCover and dedicated pockets help keep the pliers organized.\u003c\/li\u003e\n\u003cli\u003e600D polyester construction for the pouch.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe WORKPRO set suits people doing retaining-ring installation or removal and assembly tasks that benefit from holding power and easy repositioning. Its four jaw configurations, specified ring-size ranges, and roll-up pouch make it a practical fit for jobs requiring internal or external snap ring pliers.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which retaining ring sizes fit the WORKPRO snap ring pliers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO snap ring pliers have 0.07-inch (1.78 mm) tips designed for internal rings from 1-1\/16 to 1-3\/4 inches and external rings from 15\/16 to 1-7\/16 inches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the WORKPRO 4-piece snap ring pliers set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO set includes internal and external straight-jaw pliers, internal and external bent-jaw pliers, and a 600D polyester roll-up storage pouch.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57566051303802,"sku":"B07GZCQP4N","price":44.54,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-snap-ring-pliers-set-front.jpg?v=1794683399"},{"product_id":"workpro-6-inch-woodworking-clamps-2-pack-with-quick-release-and-spreader-function","title":"WORKPRO 6-Inch Woodworking Clamps, 2-Pack with Quick Release and Spreader Function","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO 6-inch woodworking clamps are a light-duty 2-pack for holding wood during DIY and woodworking tasks, with a 6-inch (150 mm) maximum opening and clamping force up to 150 lb (68 kgf).\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2-3\/8-inch (6.03 cm) throat depth — reaches inward from the edge of a workpiece.\u003c\/li\u003e\n\u003cli\u003eNylon reinforced with hardened steel bars — combines a lightweight clamp body with steel bar reinforcement.\u003c\/li\u003e\n\u003cli\u003eSoft, flexible pads with anti-slip texture — help protect wood surfaces from scratches and dents while limiting movement.\u003c\/li\u003e\n\u003cli\u003eQuick-release lever — adjusts the distance quickly and helps remove the clamp from a project.\u003c\/li\u003e\n\u003cli\u003eErgonomic, non-slip handles — provide a controlled grip and are designed to reduce hand fatigue during extended use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHolding pieces steady can make woodworking and DIY tasks easier to manage, from carpentry and cabinet work to craft projects. These clamps are made for light-duty work and suit carpenters, cabinet makers, and hobbyists who need a way to secure or spread workpieces while working.\u003c\/p\u003e\u003ch3\u003eWhat can these WORKPRO clamps do?\u003c\/h3\u003e\u003cp\u003eThey can clamp pieces together or act as spreaders, with a fast-change red button for switching between the two functions. This gives you one tool for holding workpieces and for applying outward pressure when a task calls for expansion.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChange between clamping and spreading with the red button.\u003c\/li\u003e\n\u003cli\u003eUse the quick-release lever for rapid adjustment and removal.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow are the clamps built to contact wood?\u003c\/h3\u003e\u003cp\u003eThe clamp bars use nylon reinforced with hardened steel, a construction designed for repeated use on woodworking and construction-site tasks. Soft, flexible pads sit against the work surface; their textured faces increase contact and help prevent slipping that could mark or shift a project.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePad surfaces are intended to reduce scratches and dents on workpieces.\u003c\/li\u003e\n\u003cli\u003eTextured pads help maintain contact with the wood while clamping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWho are these clamps suited to?\u003c\/h3\u003e\u003cp\u003eThey are intended for woodworking and DIY projects, including carpentry, cabinet making, and hobby work. The light-duty format is suited to tasks where a firm hold or spreading action is useful, while the handle shape supports control during adjustment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUseful for workpieces that fit within the stated opening and throat depth.\u003c\/li\u003e\n\u003cli\u003eDesigned for quick tightening, adjustment, and release during project work.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWORKPRO’s 2-pack is a practical fit for carpenters, cabinet makers, and hobbyists who need light-duty clamping and spreading for woodwork. Each clamp combines a 6-inch opening with a fast-change clamp-and-spreader function.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How wide can the WORKPRO 6-inch woodworking clamps open?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Each WORKPRO 6-inch woodworking clamp opens up to 6 inches (150 mm) and has a 2-3\/8-inch (6.03 cm) throat depth.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many WORKPRO wood clamps are included?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO 6-inch woodworking clamps come as a 2-pack, providing two clamps for woodworking or DIY tasks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57566960157050,"sku":"B0875TD935","price":44.78,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-6-inch-wood-clamps-pair-front.jpg?v=1794685382"},{"product_id":"workpro-16-inch-hand-rake-with-soft-grip-for-precise-small-space-gardening","title":"WORKPRO 16-Inch Hand Rake with Soft Grip for Precise Small-Space Gardening","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO 16-inch hand rake is a compact garden tool for clearing leaves and tending small garden spaces, with a polished stainless steel head and a soft-grip handle.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-hardness polished stainless steel — resists rust and corrosion during garden use.\u003c\/li\u003e\n\u003cli\u003e16 inches (40.64 cm) long and 8 oz (227 g) — sized for handheld work in smaller spaces.\u003c\/li\u003e\n\u003cli\u003ePP+TPR contoured handle — provides a non-slip grip and helps reduce wrist fatigue.\u003c\/li\u003e\n\u003cli\u003eFlexible tines — support controlled raking, including in tougher soil.\u003c\/li\u003e\n\u003cli\u003eHandle hanging hole and lanyard — offer a convenient way to store the tool after use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFull-size rakes can be difficult to maneuver around delicate plants or into narrow gaps. This hand rake is made for more focused garden tasks, from tidying small beds to loosening soil in planters. Its compact form helps gardeners work in confined areas where careful control matters.\u003c\/p\u003e\n\u003ch3\u003eWhat garden jobs is the WORKPRO hand rake designed for?\u003c\/h3\u003e\n\u003cp\u003eThe WORKPRO hand rake is designed for clearing fallen leaves, spreading mulch, and lightly tilling soil in small garden spaces. Its narrow working head can reach cracks and crevices and move around delicate plants. Use it for focused work in flower beds, herb gardens, and planter boxes, including cultivating, turning, and loosening soil.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUseful for leaf cleanup and mulch spreading in small spaces.\u003c\/li\u003e\n\u003cli\u003eMade for light soil work rather than broad, full-size raking jobs.\u003c\/li\u003e\n\u003cli\u003eSuitable for gardeners at beginner and experienced skill levels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does the handle support controlled gardening?\u003c\/h3\u003e\n\u003cp\u003eThe handle combines polypropylene (PP) and thermoplastic rubber (TPR), with finger contours shaped for a secure hold. The soft, non-slip grip helps provide control while working, and its design helps reduce wrist fatigue during gardening.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eContoured areas give fingers a place to rest on the handle.\u003c\/li\u003e\n\u003cli\u003eThe grip is intended to feel gentle in the hand during use.\u003c\/li\u003e\n\u003cli\u003eFlexible tines help with precision when raking tougher soil.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow can I store the WORKPRO hand rake?\u003c\/h3\u003e\n\u003cp\u003eThe WORKPRO hand rake has a hanging hole in its handle and comes with a lanyard for convenient storage after gardening. Its handheld format and light weight make it easy to keep with other garden tools.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHang it by the handle after use.\u003c\/li\u003e\n\u003cli\u003eThe included lanyard provides another storage option.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis rake suits gardeners who want a compact tool for precise maintenance in flower beds, herb gardens, and planter boxes, whether they are new to gardening or have years of experience. It is intended for small-space raking and light soil work, with a contoured grip and flexible tines for controlled handling.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What garden tasks is the WORKPRO hand rake used for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO hand rake is made for clearing fallen leaves, spreading mulch, and lightly tilling or loosening soil in small garden spaces, including flower beds, herb gardens, and planter boxes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How do you store the WORKPRO hand rake?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO hand rake has a hanging hole in its handle and comes with a lanyard, giving you convenient options for hanging it after use.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567115936122,"sku":"B0DM77VMFL","price":31.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-hand-rake-front-view.jpg?v=1794691938"},{"product_id":"workpro-10-inch-flat-file-double-cut-steel-tool-for-sharpening-and-deburring","title":"WORKPRO 10-Inch Flat File, Double-Cut Steel Tool for Sharpening and Deburring","description":"\u003cp\u003eWORKPRO W051002 is a flat hand file for sharpening tools and deburring workpieces, with a 10 in (25.4 cm) length and double-cut filing surfaces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHigh-carbon hardened steel — provides the file’s working construction for workshop and repair tasks.\u003c\/li\u003e\n\u003cli\u003ePrecision-cut teeth — support material removal when filing.\u003c\/li\u003e\n\u003cli\u003eDouble-cut pattern on the working surfaces — suits sharpening, deburring, smoothing, and shaping.\u003c\/li\u003e\n\u003cli\u003eErgonomic handle with a textured, anti-slip grip — supports control while filing.\u003c\/li\u003e\n\u003cli\u003e10 in (25.4 cm) file length — offers reach for a range of workshop tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eTool edges, rough surfaces, and burrs can all need attention during maintenance, fabrication, and general repairs. This hand file is made for those jobs, whether you are restoring a cutting edge, smoothing a workpiece, shaping material, or removing sharp edges from metal. Its range of uses makes it relevant for workshop upkeep as well as jobsite and home DIY tasks.\u003c\/p\u003e\u003ch3\u003eWhat jobs is the WORKPRO flat file designed for?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO W051002 is designed for tool sharpening, deburring, smoothing rough surfaces, and shaping materials. Use it for maintenance and repair work where material needs to be removed by hand, including metalworking and general workshop tasks. It can also help refine fabrication projects and remove sharp edges from workpieces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSharpening blades and other tools\u003c\/li\u003e\n\u003cli\u003eRemoving burrs from metal\u003c\/li\u003e\n\u003cli\u003eSmoothing rough edges and surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow do the filing surfaces remove material?\u003c\/h3\u003e\u003cp\u003ePrecision-cut teeth on the working surfaces provide the filing action for sharpening and surface preparation. The double-cut pattern is intended for efficient material removal, making the file useful when you need to take away excess material while refining an edge or workpiece.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuitable for deburring and shaping tasks\u003c\/li\u003e\n\u003cli\u003eMade for smoothing and surface preparation\u003c\/li\u003e\n\u003cli\u003eDesigned for use on metal and other workpieces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat makes the handle easier to control?\u003c\/h3\u003e\u003cp\u003eThe ergonomic handle has a textured, anti-slip grip to support control during filing. Its design is also intended to reduce hand fatigue during extended filing sessions, which can be useful when a maintenance or repair task involves sustained hand work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTextured grip surface\u003c\/li\u003e\n\u003cli\u003eAnti-slip handle design\u003c\/li\u003e\n\u003cli\u003eFor professional and DIY users\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe WORKPRO W051002 suits contractors, mechanics, woodworkers, fabricators, and home DIY users who need a hand file for sharpening tools and working on rough or burred surfaces. It brings a 10-inch format, double-cut filing surfaces, and an ergonomic grip together in one tool for workshop and repair tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long is the WORKPRO W051002 flat file?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO W051002 flat file has a 10 in (25.4 cm) file length.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many files come in the WORKPRO W051002 pack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO W051002 flat file is sold as a single pack containing one file.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567197036922,"sku":"B077Q1PVSS","price":28.62,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-w051002-flat-file-front-view.jpg?v=1794695458"},{"product_id":"workpro-16-inch-dual-drive-breaker-bar-3-8-inch-and-1-2-inch-drives-360-flex-head","title":"WORKPRO 16-Inch Dual Drive Breaker Bar, 3\/8-Inch and 1\/2-Inch Drives, 360° Flex Head","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO 16-inch Dual Drive Breaker Bar is designed to help loosen stubborn nuts and bolts, with 3\/8-inch and 1\/2-inch drive ends and a head that rotates 360°.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual 3\/8-inch and 1\/2-inch drives — use sockets with either drive size.\u003c\/li\u003e\n\u003cli\u003e360° rotating head — apply leverage from different angles, including in narrow spaces.\u003c\/li\u003e\n\u003cli\u003eCR-MO head and chrome vanadium steel construction — combine hardness and toughness in a corrosion-resistant tool.\u003c\/li\u003e\n\u003cli\u003eSpring-loaded ball bearing — helps keep a socket securely in place.\u003c\/li\u003e\n\u003cli\u003eRounded, smooth-profile handle — designed for a comfortable grip and reduced fatigue.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen a nut or bolt is rusted, stuck, or difficult to loosen, a breaker bar provides extra leverage for the task. WORKPRO’s dual-drive design is made for industrial, construction, and mechanic work, including car and motorcycle maintenance and repair.\u003c\/p\u003e\n\u003ch3\u003eWhat jobs is the WORKPRO breaker bar made for?\u003c\/h3\u003e\n\u003cp\u003eIt is made to provide extra leverage when breaking loose or loosening rusted, stubborn, or stuck nuts and bolts. Its rotating head helps you approach the fastener from different angles, which can be useful when working around restricted spaces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFor industrial, construction, and mechanic tasks.\u003c\/li\u003e\n\u003cli\u003eSuitable for car and motorcycle maintenance and repair.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich socket drive sizes does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe WORKPRO breaker bar has both 3\/8-inch (9.5 mm) and 1\/2-inch (12.7 mm) drive ends, so it works with sockets in either of those drive sizes. The spring-loaded ball bearing helps hold the socket securely during use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo drive sizes are built into one bar.\u003c\/li\u003e\n\u003cli\u003eThe ball bearing is designed to help prevent a socket from dropping.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does the head and handle help during use?\u003c\/h3\u003e\n\u003cp\u003eThe head rotates through 360°, allowing leverage from multiple angles, while the rounded handle profile is designed to feel comfortable in the hand and minimize fatigue. The bar measures 16 inches (40.64 cm), giving you a longer handle for leverage than a compact ratchet handle.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBlack phosphate finish on the chrome vanadium steel.\u003c\/li\u003e\n\u003cli\u003eCR-MO head for hardness and toughness.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant construction designed for longer service life.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe WORKPRO Dual Drive Breaker Bar suits mechanics, builders, and vehicle owners who need extra leverage for stubborn fasteners and want one tool with two common drive sizes. Its rotating head, dual drives, and 16-inch length make it a practical choice for car and motorcycle repair as well as industrial and construction work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What socket drive sizes fit the WORKPRO Dual Drive Breaker Bar?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Dual Drive Breaker Bar has 3\/8-inch and 1\/2-inch drive ends and fits sockets with either drive size.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the WORKPRO Dual Drive Breaker Bar used for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Dual Drive Breaker Bar provides extra leverage for loosening stubborn, stuck, or rusted nuts and bolts, including during car and motorcycle repairs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567199461754,"sku":"B0CXS8L47J","price":37.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-breaker-bar-full-tool.jpg?v=1794695595"},{"product_id":"workpro-precision-screwdriver-set-10-piece-with-pouch-for-delicate-repairs","title":"WORKPRO Precision Screwdriver Set, 10-Piece with Pouch for Delicate Repairs","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO’s 10-piece precision screwdriver set is made for careful fastening on small items, with finely crafted tips and an included storage pouch.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 precision screwdrivers in varied sizes — choose a tool for a range of small-scale fastening tasks.\u003c\/li\u003e\n\u003cli\u003eFinely crafted tips — engage small screws accurately with slip-resistant contact.\u003c\/li\u003e\n\u003cli\u003eErgonomic handles — support a firm, comfortable hold and improved control during extended use.\u003c\/li\u003e\n\u003cli\u003eIncluded pouch — keeps the screwdrivers organized and makes the set easy to transport.\u003c\/li\u003e\n\u003cli\u003eFor electronics, eyeglasses, watches, and other delicate items — suited to precise, careful fastening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSmall screws call for controlled handling. This set is intended for detailed fastening work on delicate items, where choosing a suitable precision screwdriver and maintaining control matter. Its range of sizes and tip design are aimed at small-scale tasks rather than general fastening jobs.\u003c\/p\u003e\n\u003ch3\u003eWhat can I use the WORKPRO precision screwdriver set for?\u003c\/h3\u003e\n\u003cp\u003eThe set is designed for small-scale fastening on electronics, eyeglasses, watches, and other delicate items. Its precision tips are made to engage small screws accurately and resist slipping during use. This makes it suitable for careful work where the screw and surrounding item need controlled handling.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse it for precision fastening on small items.\u003c\/li\u003e\n\u003cli\u003eChoose from a variety of screwdriver sizes for different small-scale tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do the tips and handles support controlled work?\u003c\/h3\u003e\n\u003cp\u003eEach screwdriver has a finely crafted tip for accurate, slip-resistant engagement with small screws. Ergonomically designed handles provide a firm, comfortable hold, supporting control when working for extended periods. Together, these features are intended to help keep the tool engaged with the screw during careful fastening.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTips are designed for small screws, not described as a general-purpose tip range.\u003c\/li\u003e\n\u003cli\u003eHandle design supports a comfortable grip during extended use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat comes with the set, and how is it stored?\u003c\/h3\u003e\n\u003cp\u003eThe set contains 10 precision screwdrivers and an included pouch. The pouch keeps the tools organized together and makes them easy to transport, so the set can be kept ready for small fastening tasks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10-piece screwdriver set.\u003c\/li\u003e\n\u003cli\u003ePouch included for organization and transport.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe WORKPRO set is suited to people handling small screws on electronics, eyeglasses, watches, and other delicate items. Its varied screwdriver sizes, precision tips, ergonomic handles, and included pouch make it a focused choice for careful, controlled fastening in a portable, organized set.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the WORKPRO 10-piece precision screwdriver set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO precision screwdriver set includes 10 screwdrivers in varied sizes and a pouch to organize and transport them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tasks is the WORKPRO precision screwdriver set designed for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO precision screwdriver set is designed for small-scale fastening on electronics, eyeglasses, watches, and other delicate items.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567205261690,"sku":"B091C32HLX","price":30.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-precision-screwdriver-set-full-set.jpg?v=1794695944"},{"product_id":"workpro-adjustable-oil-filter-wrench-2-3-8-3-1-8-in-auto-clamp-spring-grip","title":"WORKPRO Adjustable Oil Filter Wrench, 2-3\/8–3-1\/8 in, Auto-Clamp Spring Grip","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Universal Oil Filter Wrench is an adjustable tool for removing vehicle engine filters, fitting filter diameters from 2-3\/8 to 3-1\/8 inches (60 to 80 millimeters).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAuto-clamp spring — helps the wrench fit onto a filter.\u003c\/li\u003e\n\u003cli\u003eMulti-tooth grip, friction design and drop-forged steel — designed for grip, torque and reliability.\u003c\/li\u003e\n\u003cli\u003eHand-friendly, ergonomic body — supports a more comfortable tool experience.\u003c\/li\u003e\n\u003cli\u003eMaterials comply with environmental protection requirements — includes a stated limit for the total content of three o-phenols.\u003c\/li\u003e\n\u003cli\u003eMade by a globally recognized tool supplier — supports consistent performance and reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemoving a tight oil filter can be difficult when access is restricted. This adjustable wrench is made for vehicle filter changes and is also suited to engine filters, conduit and fittings. Its diameter range helps you check fit before using it, while the spring-assisted design is intended to make placement easier in confined work areas.\u003c\/p\u003e\n\u003ch3\u003eWhat filter sizes and jobs does it suit?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO fits oil filters measuring 2-3\/8 to 3-1\/8 inches (60 to 80 millimeters) in diameter. Use that range to compare the tool with the filter you need to remove; it is designed for filters within those measurements. The tool is also suitable for work involving conduit and fittings, as well as vehicle engine filters. Its adjustable format is intended to help with filter removal in tight spaces.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eApplications include engine filters, conduit and fittings.\u003c\/li\u003e\n\u003cli\u003eDesigned to help remove tough vehicle filters and filters in tight spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does the wrench grip and connect to a driver?\u003c\/h3\u003e\n\u003cp\u003eAn auto-clamp spring helps position the wrench on the filter, and its multi-tooth design grips the filter. The friction design and drop-forged steel are the features behind its stated torque and reliability. Choose either of the supported drive options to turn the wrench.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrive options: a 1\/2-inch square driver tool or a 7\/8-inch wrench or socket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat are the body and material details?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO has a hand-friendly body with an ergonomic design. Its materials comply with environmental protection requirements, with the total content of three o-phenols below 1,000 ppm. The tool is manufactured by a globally recognized tool supplier, with consistent performance and reliability as the stated quality focus.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEnvironmental specification: total content of three o-phenols is less than 1,000 ppm.\u003c\/li\u003e\n\u003cli\u003eErgonomic body design for handling during filter work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis wrench suits vehicle owners and tool users who need an adjustable option for removing filters within its stated diameter range, including work around tight spaces, conduit or fittings. Its spring-assisted fit, multi-tooth grip and two drive choices define how it handles filter removal.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What filter sizes does the WORKPRO Universal Oil Filter Wrench fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Universal Oil Filter Wrench fits oil filters from 2-3\/8 to 3-1\/8 inches (60 to 80 millimeters) in diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools can drive the WORKPRO Universal Oil Filter Wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Universal Oil Filter Wrench can be driven with a 1\/2-inch square driver tool or a 7\/8-inch wrench or socket.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567207653754,"sku":"B0DBKTTH5H","price":38.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-oil-filter-wrench-front-view.jpg?v=1794696115"},{"product_id":"workpro-flexible-silicone-oil-funnel-blue-roll-up-design-for-tight-spaces","title":"WORKPRO Flexible Silicone Oil Funnel, Blue, Roll-Up Design for Tight Spaces","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Flexible Silicone Oil Funnel is made for transferring oil into vehicles and machinery, with a flexible body and an aluminum core wrapped in thicker silicone.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlexible silicone body — bends to help guide oil through tight spaces.\u003c\/li\u003e\n\u003cli\u003e14.57 inches long and 6.69 inches wide (37 cm x 17 cm), weighing 0.48 lb (0.22 kg) — a lightweight format for handling and storage.\u003c\/li\u003e\n\u003cli\u003eRolls up when not in use — takes up less storage space.\u003c\/li\u003e\n\u003cli\u003eAluminum core wrapped in thicker silicone — helps resist swelling, warping, and deformation during long-term engine oil contact.\u003c\/li\u003e\n\u003cli\u003eCan be shaped to different angles and reused thousands of times — supports repeated oil-transfer tasks.\u003c\/li\u003e\n\u003cli\u003eSilicone construction — designed for smooth, fast oil transfer with minimal mess.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAdding oil can be awkward when access is restricted or the fill point sits at an angle. WORKPRO’s flexible funnel is designed to help direct oil into hard-to-reach areas across different vehicles and equipment, for both DIY users and professionals.\u003c\/p\u003e\u003ch3\u003eWhich vehicles and equipment can use this oil funnel?\u003c\/h3\u003e\u003cp\u003eWORKPRO Flexible Silicone Oil Funnel is suited to cars, trucks, motorcycles, forklifts, lawn mowers, and a wide range of industrial and farming equipment. Its purpose is oil transfer across different types of machinery and vehicles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade for automotive, equipment, and farming applications.\u003c\/li\u003e\n\u003cli\u003eNot recommended for use with gasoline.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does the flexible design help with oil transfer?\u003c\/h3\u003e\u003cp\u003eThe funnel’s flexible body can be maneuvered in tight spaces and shaped to suit different angles. This helps guide oil with a steady, controlled pour; the silicone is designed to support smooth, fast transfer with minimal mess.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUseful when a straight funnel position is difficult to achieve.\u003c\/li\u003e\n\u003cli\u003eDesigned for both DIY oil changes and professional use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow can I store the funnel between uses?\u003c\/h3\u003e\u003cp\u003eWORKPRO Flexible Silicone Oil Funnel rolls up for compact storage when it is not in use. Its listed dimensions are 14.57 inches long and 6.69 inches wide, and it weighs 0.48 lb.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBlue funnel body.\u003c\/li\u003e\n\u003cli\u003eLightweight and portable for storage between tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat is the funnel’s core made of?\u003c\/h3\u003e\u003cp\u003eAn aluminum core sits inside thicker silicone, combining a supporting core with a flexible outer body. The construction is designed to resist swelling, warping, and deformation even with long-term engine oil contact.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFlexible enough to be reshaped for different angles.\u003c\/li\u003e\n\u003cli\u003eDesigned for repeated use, with the funnel reusable thousands of times.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis WORKPRO funnel suits vehicle owners, DIYers, and professionals who need a flexible tool for transferring oil around restricted-access areas. Its roll-up design and silicone body make it a practical fit for repeated oil-transfer work across vehicles and equipment; it is not recommended for gasoline.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which equipment can the WORKPRO Flexible Silicone Oil Funnel be used with?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Flexible Silicone Oil Funnel is suitable for cars, trucks, motorcycles, forklifts, lawn mowers, and a wide range of industrial and farming equipment.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the WORKPRO Flexible Silicone Oil Funnel be used with gasoline?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Flexible Silicone Oil Funnel is designed for oil transfer and is not recommended for use with gasoline.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567223284090,"sku":"B0F3HCS7WX","price":31.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-silicone-oil-funnel-full-view.jpg?v=1794697042"},{"product_id":"workpro-precision-pick-and-hook-set-9-piece-with-short-and-long-reach","title":"WORKPRO Precision Pick and Hook Set, 9-Piece with Short and Long Reach","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO 9-piece precision pick and hook set is made for removing small automotive and machinery components, with four mini hooks, four long hooks and a flat shovel.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eNine tools in one set — choose a hook or scraper profile for different maintenance tasks.\u003c\/li\u003e\n\u003cli\u003eMini hooks measure 6.5 in (16.5 cm) overall — work with smaller parts and access points.\u003c\/li\u003e\n\u003cli\u003eLong hooks measure 10.23 in (26 cm) overall — reach farther into tight spaces.\u003c\/li\u003e\n\u003cli\u003eHeat-treated carbon-steel rods with chrome plating — the plated surface helps protect against corrosion and rust.\u003c\/li\u003e\n\u003cli\u003eErgonomic handles — provide a comfortable grip and help reduce fatigue during use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSmall hoses, clips, seals and other components can be difficult to grasp with fingers, especially when they sit inside a confined area. This set brings together short and long pick tools for car repair and machinery maintenance, along with a flat shovel for scraping. The sharp tips are designed to engage small parts, while the extended tools help reach into deeper spaces.\u003c\/p\u003e\u003ch3\u003eWhat tools are included in the WORKPRO set?\u003c\/h3\u003e\u003cp\u003eThe set contains four mini hooks, four long hooks and one flat shovel. The hook assortment includes straight, curved and angled profiles, giving you different shapes for picking, hooking or working around small components.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMini hooks: 6.5 in (16.5 cm) overall, with 3 in (7.6 cm) shafts.\u003c\/li\u003e\n\u003cli\u003eLong hooks: 10.23 in (26 cm) overall, with 6 in (15.2 cm) shafts.\u003c\/li\u003e\n\u003cli\u003eFlat shovel: 1 in (2.54 cm) wide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat jobs are these precision hooks designed for?\u003c\/h3\u003e\u003cp\u003eWORKPRO precision hooks are designed to remove hoses, moldings, clips, clamps, seals, O-rings, cotter pins and gaskets. Their pointed ends can engage parts that are too small to pick up with your fingers, and the longer tools provide added reach when components sit in tight spaces.\u003c\/p\u003e\u003cp\u003eUse the different profiles to hook, pick or scrape during automotive repair and other machinery maintenance. The flat shovel adds a scraping option within the same tool set.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse a hook profile for picking or lifting small components.\u003c\/li\u003e\n\u003cli\u003eUse the flat shovel when a scraping edge is needed.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat are the rods and handles made for?\u003c\/h3\u003e\u003cp\u003eThe hook rods are made from heat-treated carbon steel and have a chrome-plated surface that helps protect them from corrosion and rust. Ergonomically designed handles provide a comfortable grip and are intended to reduce fatigue while working.\u003c\/p\u003e\u003cp\u003eThe combination of compact and extended tools supports access to components at different depths. Choose a mini or long hook according to the reach needed for the task.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSharp tips help engage small parts.\u003c\/li\u003e\n\u003cli\u003eDifferent hook shapes support varied picking and hooking tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis set suits vehicle owners and mechanics working on car repairs, as well as people maintaining other machinery and needing to handle small components in confined areas. Its four mini hooks, four long hooks and 1 in (2.54 cm) flat shovel bring multiple pick, hook and scraping options together for detailed maintenance work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the WORKPRO precision pick and hook set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO precision pick and hook set contains four 6.5 in mini hooks, four 10.23 in long hooks and one 1 in flat shovel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What can the WORKPRO precision pick and hook set be used for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO precision pick and hook set is designed for car repair and machinery maintenance, including removing hoses, clips, clamps, seals, O-rings, cotter pins and gaskets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567661752698,"sku":"B07HBQY2Q7","price":30.66,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-pick-hook-set-full-set.jpg?v=1794703648"},{"product_id":"workpro-6-inch-hand-seamer-tool-for-sheet-metal-bending-seaming-and-flattening","title":"WORKPRO 6-Inch Hand Seamer Tool for Sheet Metal Bending, Seaming and Flattening","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO Hand Seamer is a 6-inch (15.2 cm) forged carbon-steel tool for bending, seaming and flattening sheet metal in workshops, garages and on job sites.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour V-grooves on each jaw, spaced approximately 7 mm apart — built-in guides help make measured, consistent bends.\u003c\/li\u003e\n\u003cli\u003eContoured, textured anti-slip TPR handle — supports grip and control while helping reduce hand strain.\u003c\/li\u003e\n\u003cli\u003eSafety lock — holds the jaws closed when the tool is not in use.\u003c\/li\u003e\n\u003cli\u003eWorks with 18-gauge galvanized steel and stainless steel, as well as 30-gauge cold-rolled steel — suits a range of sheet-metal tasks.\u003c\/li\u003e\n\u003cli\u003eCompact design with an integrated hanging hole — helps with access in confined spaces and convenient storage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSheet-metal work often involves shaping edges or flattening seams where a larger brake is difficult to maneuver. This hand seamer is made for HVAC work, metal fabrication and DIY projects that call for controlled hand bending, seaming or flattening.\u003c\/p\u003e\u003ch3\u003eWhat sheet metals can the WORKPRO Hand Seamer handle?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO Hand Seamer handles 18-gauge galvanized steel, stainless steel and 30-gauge cold-rolled steel. Its application range also includes stainless steel, making it useful across different sheet-metal jobs. The straight, milled jaws have an oxidation treatment, and the tool has a black oxide finish to resist wear and corrosion.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged carbon-steel construction.\u003c\/li\u003e\n\u003cli\u003eSuitable for bending, seaming and flattening tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does the WORKPRO Hand Seamer help guide a bend?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO Hand Seamer has four precisely spaced V-grooves on each jaw that serve as built-in measuring guides. With approximately 7 mm between grooves, these guides help you position and repeat bends consistently. The straight, milled jaw design provides the working surfaces for shaping sheet metal.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour grooves on each jaw.\u003c\/li\u003e\n\u003cli\u003eGroove spacing is approximately 7 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIs the WORKPRO Hand Seamer easy to grip and store?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO Hand Seamer uses an ergonomically contoured TPR handle with a textured, anti-slip surface for a secure feel and controlled handling. The handle is designed to reduce strain during extended use. A safety lock keeps the jaws closed for storage or transport, while the hanging hole provides another storage option.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompact form for maneuvering in tight, confined spaces.\u003c\/li\u003e\n\u003cli\u003eLock the jaws closed when the tool is not in use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eHVAC specialists, metal fabricators and DIY users who need a hand tool for shaping sheet metal can get the most out of this seamer. Its compact design, guided jaws and grip features suit bending, seaming and flattening work in workshops, garages and construction settings. It is a 6-inch hand tool for sheet-metal tasks where maneuverability and measured bends matter.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sheet metal can the WORKPRO Hand Seamer handle?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Hand Seamer handles 18-gauge galvanized steel, stainless steel and 30-gauge cold-rolled steel for bending, seaming and flattening.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How does the WORKPRO Hand Seamer guide bends?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Hand Seamer has four V-grooves on each jaw, spaced approximately 7 mm apart, that serve as built-in measuring guides.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567669059962,"sku":"B0F8QG9SQ7","price":37.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-hand-seamer-front-view.jpg?v=1794704072"},{"product_id":"workpro-13-piece-spade-drill-bit-set-sae-wood-bits-with-storage-pouch","title":"WORKPRO 13-Piece Spade Drill Bit Set, SAE Wood Bits with Storage Pouch","description":"\u003cp\u003eWORKPRO’s 13-piece SAE spade drill bit set is made for drilling wood and includes a nylon storage pouch for keeping the set together.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHeat-treated medium carbon steel — provides the material construction of each bit.\u003c\/li\u003e\n\u003cli\u003ePolished head surfaces — made for long-lasting use.\u003c\/li\u003e\n\u003cli\u003eDouble cutting spurs — designed for fast, clean drilling.\u003c\/li\u003e\n\u003cli\u003e1\/4-inch (6.35 mm) hex shanks with grooves — help reduce slipping and bit release during drilling.\u003c\/li\u003e\n\u003cli\u003eNylon storage pouch — keeps the 13-piece SAE set together between jobs.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor wood-drilling tasks, the cutting edge and chip-clearing groove are designed to support efficient work through the material. The set’s SAE sizing and hex shanks make it a practical option for users whose drill driver or impact driver accepts this common shank style.\u003c\/p\u003e\u003ch3\u003eHow are these spade bits designed to drill wood?\u003c\/h3\u003e\u003cp\u003eWORKPRO spade bits use double cutting spurs to make fast, clean drilling easier. As the bit turns, its groove helps clear wood chips from the drilling area, reducing clogging and supporting smoother progress. The polished head surface and heat-treated medium carbon steel construction are built into the bit design for repeated use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDouble cutting spurs are the cutting feature for drilling.\u003c\/li\u003e\n\u003cli\u003eThe groove moves wood chips away to help keep the bit from clogging.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill the shanks fit my drill driver or impact driver?\u003c\/h3\u003e\u003cp\u003eThe bits have 1\/4-inch (6.35 mm) hex shanks and are compatible with most drill drivers and impact drivers. A groove in each shank helps reduce slipping and helps prevent the bit from slipping out while drilling. Check that your tool accepts a 1\/4-inch hex shank before choosing the set.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHex-shank format suits most drill drivers and impact drivers.\u003c\/li\u003e\n\u003cli\u003eThe shank groove contributes to bit retention during drilling.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat comes in the WORKPRO set?\u003c\/h3\u003e\u003cp\u003eThe set contains 13 spade drill bits in SAE sizing and a nylon storage pouch. The pouch provides a place to keep the bits together when they are not in use. SAE sizing is useful for shoppers looking for a set in that measurement system; the set is intended for wood drilling.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e13-piece bit set.\u003c\/li\u003e\n\u003cli\u003eNylon pouch included for storage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis set suits DIYers and tradespeople who need SAE spade bits for wood-drilling jobs and use a compatible drill driver or impact driver. The double cutting spurs, chip-clearing groove and 1\/4-inch hex shanks define how the bits are made to work with wood and common hex-shank tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is included in the WORKPRO spade drill bit set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO spade drill bit set includes 13 SAE spade bits and a nylon storage pouch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Are WORKPRO spade drill bits compatible with impact drivers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO spade drill bits have 1\/4-inch hex shanks and fit most impact drivers and drill drivers that accept this shank style.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567669322106,"sku":"B07C87XZXN","price":37.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-spade-bit-set-full-set.jpg?v=1794704070"},{"product_id":"workpro-plier-organizer-rack-2-pack-20-slot-tool-storage-with-non-slip-base","title":"WORKPRO Plier Organiser Rack, 2-Pack 20-Slot Tool Storage with Non-Slip Base","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO 2-Pack Plier Organizer Rack stores up to 20 pliers in two connected-ready, 10-slot racks, with slots for tools up to 0.8 in (2.032 cm) wide.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTwo 10-slot racks — organize up to 20 pliers in one set.\u003c\/li\u003e\n\u003cli\u003eLightweight plastic construction — easy to carry and resistant to rust and corrosion.\u003c\/li\u003e\n\u003cli\u003eNon-slip rubber base — helps keep stored tools from shifting or falling.\u003c\/li\u003e\n\u003cli\u003eEnd connectors — let you add racks as your tool collection grows.\u003c\/li\u003e\n\u003cli\u003eFits storage areas at least 3 in (7.62 cm) high — works in drawers, toolboxes, and on shelves.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eLoose hand tools can be difficult to locate and keep organized in a workshop, garage, or toolbox. WORKPRO’s two-rack set gives pliers separate slots for accessible storage, while its expandable design makes it possible to extend the setup as your collection changes. The racks can also hold other compatible hand tools, making them useful across different storage areas.\u003c\/p\u003e\u003ch3\u003eHow many tools can the WORKPRO rack hold?\u003c\/h3\u003e\u003cp\u003eThe set has two racks with 10 slots each, for storage of up to 20 pliers. Each slot is 0.8 in wide, so compare that opening with your tools; the organizer is compatible with pliers up to 0.8 in wide. Pliers are not included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSeparate slots keep stored tools arranged for quick access.\u003c\/li\u003e\n\u003cli\u003eThe rack layout is intended to make use of toolbox, workbench, or wall storage space.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill the organizer stay in place, and what is it made from?\u003c\/h3\u003e\u003cp\u003eThe non-slip rubber base helps hold the rack and its tools in place, including during transport. The organizer is made from lightweight plastic that will not rust or corrode and is resistant to aging and cracking. Smooth edges help reduce the risk of cuts when handling the rack.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the rack to help prevent tools from shifting or falling out of position.\u003c\/li\u003e\n\u003cli\u003eThe lightweight construction makes the organizer easy to carry.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere can I use the WORKPRO plier organizer?\u003c\/h3\u003e\u003cp\u003ePlace it in a drawer, toolbox, or on a shelf that is at least 3 in high. The slots can accommodate pliers and other hand tools such as wrenches, hammers, and screwdrivers, provided they fit the slot width. End connectors let you join additional racks to expand the arrangement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuitable for workshop and garage storage as well as toolbox organization.\u003c\/li\u003e\n\u003cli\u003eGood to know: choose a storage space with at least 3 in of clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis set suits people who want separated, accessible storage for pliers and compatible hand tools in a workshop, garage, or toolbox. It is especially useful when a tool collection may grow, because the end connectors allow the rack arrangement to expand. With two 10-slot racks, a non-slip rubber base, and slots for tools up to 0.8 in wide, it provides organized storage for compatible hand tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many pliers fit in the WORKPRO 2-Pack Plier Organizer Rack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO 2-Pack Plier Organizer Rack has two 10-slot racks and stores up to 20 pliers, with compatibility for pliers up to 0.8 in wide.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What storage spaces fit the WORKPRO Plier Organizer Rack?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Plier Organizer Rack fits drawers, toolboxes, and shelves at least 3 in high; its slots also hold compatible wrenches, hammers, and screwdrivers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567866585466,"sku":"B0D72S9ZDK","price":34.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-plier-organizer-front-view.jpg?v=1794712054"},{"product_id":"workpro-magnetic-torpedo-level-6-3-inch-aluminum-alloy-with-four-vials","title":"WORKPRO Magnetic Torpedo Level, 6.3-Inch Aluminium Alloy with Four Vials","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Magnetic Torpedo Level is a compact tool for checking angles and aligning work, with four angle vials and a magnetic base for use on iron materials.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFour high-visibility vials with a maximum accuracy of 0.5 mm\/m — check common angles during fitting and alignment.\u003c\/li\u003e\n\u003cli\u003eFour strong rare earth magnets — attach the level to iron materials and free your hands while measuring.\u003c\/li\u003e\n\u003cli\u003eThumb screw for conduit — attach the level to conduit to help eliminate dog legs when bending.\u003c\/li\u003e\n\u003cli\u003eIntegrated metric and imperial ruler — read measurements on either scale.\u003c\/li\u003e\n\u003cli\u003eAluminum-alloy body — a pocket-level format for carrying and storage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eUse this torpedo level when you need to check alignment or angles during construction, home repair, or DIY work. Its compact format is suited to tasks where a small level is convenient, while its vial layout covers several common angles. The magnetic base and conduit screw also support work with iron materials and conduit bending.\u003c\/p\u003e\u003ch3\u003eWhich angles can the WORKPRO Torpedo Level check?\u003c\/h3\u003e\u003cp\u003eThe four vials indicate 0°, 90°, 30°, and 45° angles. They are made from transparent acrylic glass with smooth inner contours and bright fluorescent liquid to make the bubbles easier to see during alignment.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMaximum accuracy: 0.5 mm\/m.\u003c\/li\u003e\n\u003cli\u003eFour high-visibility vials for angle checks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does it attach to conduit or iron materials?\u003c\/h3\u003e\u003cp\u003eThe thumb screw attaches the level to conduit, helping eliminate dog legs while bending. On iron materials, the four magnets on the bottom can hold the level in place and free your hands while you measure angles.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThe integrated ruler has both metric and imperial measuring marks.\u003c\/li\u003e\n\u003cli\u003eThe magnetic base is designed for iron materials.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat are the WORKPRO Torpedo Level’s dimensions, and what jobs suit it?\u003c\/h3\u003e\u003cp\u003eThe level measures 6.3'' (160 mm) long and 1-7\/16'' (36 mm) high, and weighs 0.3 lb (142 grams). Its pocket-level size is easy to carry and store between jobs.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUseful for installing shelving, laying flooring, and aligning wallpaper.\u003c\/li\u003e\n\u003cli\u003eAlso suited to woodwork, hanging household items, construction, home repair, and home DIY projects.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis level is suited to DIY users and tradespeople who want a compact tool for angle checks, alignment, or conduit bending. Its four vials, magnetic base, and conduit thumb screw bring those functions together in a 6.3'' (160 mm) pocket-level format.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What are the dimensions and weight of the WORKPRO Torpedo Level?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Torpedo Level measures 6.3'' (160 mm) long and 1-7\/16'' (36 mm) high. It weighs 0.3 lb (142 grams).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the WORKPRO Torpedo Level made of?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Torpedo Level has an aluminum-alloy body. Its four vials are made of transparent acrylic glass.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57567915147642,"sku":"B09P3L66RR","price":34.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-torpedo-level-front-view.jpg?v=1794715380"},{"product_id":"workpro-6-inch-stubby-adjustable-wrench-1-5-8-inch-jaw-dual-scales","title":"WORKPRO 6-Inch Stubby Adjustable Wrench, 1-5\/8-Inch Jaw, Dual Scales","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO’s 6-inch (15.24 cm) stubby adjustable wrench is made for repairs and maintenance in confined spaces, with a jaw opening up to 1-5\/8 inches (41 mm).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCr-V steel with a black oxide finish — designed for durability and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eJaw opens up to 1-5\/8 inches (41 mm) — accommodates a wider range of fastener sizes.\u003c\/li\u003e\n\u003cli\u003eLaser-etched metric and imperial scales — make jaw adjustments easier to read.\u003c\/li\u003e\n\u003cli\u003eHollowed-out, shorter handle — reduces overall weight compared with standard wrenches with the same jaw opening.\u003c\/li\u003e\n\u003cli\u003eCompact stubby format — is portable and easy to store in a toolbox.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSome repair and maintenance jobs leave little room to position a full-length wrench. WORKPRO’s short-format adjustable wrench is designed for that kind of access, while its wide-opening jaw provides capacity for a range of fastener sizes. Its uses include automotive and motorcycle repairs, plumbing tasks, and general household maintenance.\u003c\/p\u003e\n\u003ch3\u003eWhat jobs is the WORKPRO stubby adjustable wrench designed for?\u003c\/h3\u003e\n\u003cp\u003eIt is made for automotive and motorcycle repairs, plumbing, and general household maintenance, particularly where working space is limited. The compact format suits jobs that call for an adjustable wrench but offer less room to maneuver a standard-length handle. Its pocket-size design also makes it straightforward to keep in a toolbox for different maintenance tasks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAutomotive repair\u003c\/li\u003e\n\u003cli\u003eMotorcycle repair\u003c\/li\u003e\n\u003cli\u003ePlumbing and household maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat size fasteners can its jaw accommodate?\u003c\/h3\u003e\n\u003cp\u003eThe jaw opens to a maximum of 1-5\/8 inches (41 mm), giving this wrench a broad opening for different fastener sizes. Laser-etched markings show measurements in both metric and imperial units, so you can use the dual-scale references when adjusting the jaw. Compare the fastener size with the maximum jaw opening when choosing this wrench for a job.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaximum jaw opening: 1-5\/8 inches (41 mm)\u003c\/li\u003e\n\u003cli\u003eMeasurement scales: metric and imperial\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does the stubby handle help in tight spaces?\u003c\/h3\u003e\n\u003cp\u003eThe handle is shorter and hollowed out compared with standard wrenches that have the same jaw opening. This construction reduces the wrench’s overall weight and makes it easier to handle in confined spaces. The compact shape supports portable storage as well as use where a longer handle can be difficult to position.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eShorter handle than standard wrenches with the same opening size\u003c\/li\u003e\n\u003cli\u003eHollowed-out handle design\u003c\/li\u003e\n\u003cli\u003eDesigned for easier handling in confined spaces\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis wrench suits people who want one compact adjustable tool for vehicle, plumbing, and household maintenance, especially when access is restricted. Its 1-5\/8-inch maximum jaw opening and short, hollowed-out handle bring broad fastener capacity into a portable format.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum jaw opening of the WORKPRO stubby adjustable wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO stubby adjustable wrench opens to a maximum of 1-5\/8 inches (41 mm) and has laser-etched metric and imperial scales.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tasks is the WORKPRO stubby adjustable wrench made for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO stubby adjustable wrench is designed for automotive and motorcycle repairs, plumbing tasks, and general household maintenance, including work in confined spaces.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57568082952570,"sku":"B0D1BWXYVK","price":36.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-stubby-adjustable-wrench-front-view.jpg?v=1794721622"},{"product_id":"workpro-garden-knee-pads-for-adults-lightweight-eva-cushion-with-adjustable-straps","title":"WORKPRO Garden Knee Pads for Adults, Lightweight EVA Cushion with Adjustable Straps","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Garden Knee Pads are a lightweight pair of EVA-cushioned kneepads designed to support your knees during extended kneeling, with adjustable double straps for a secure fit.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThick EVA foam cushion and soft lining — help keep knees from direct contact with the ground during long tasks.\u003c\/li\u003e\n\u003cli\u003eOne pair weighs 6.35 oz (180 g) — lightweight for extended wear.\u003c\/li\u003e\n\u003cli\u003eOxford surface, EVA liner, and heavy-duty nylon stitching — made to withstand wear on cement, asphalt, and rock.\u003c\/li\u003e\n\u003cli\u003eAdjustable double straps and easy-release slip-clips — fit knees up to 20 inches (50.8 cm).\u003c\/li\u003e\n\u003cli\u003ePink Ribbon campaign — purchases in its stated period were tied to a minimum $15,000 donation to Helping Women Now.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eExtended kneeling can put pressure on your knees during gardening and hands-on work. These pads add cushioning between your knees and the ground, with a design intended for tasks ranging from flooring and construction to cleaning and stocking shelves. The campaign period associated with the Pink Ribbon donation ran from October 1, 2025, to September 30, 2026.\u003c\/p\u003e\n\u003ch3\u003eHow do WORKPRO Garden Knee Pads support knees during long tasks?\u003c\/h3\u003e\n\u003cp\u003eThe EVA foam cushion and soft lining provide a padded layer between your knees and the ground. WORKPRO designed the pads to help prevent knee discomfort and reduce stress and fatigue during prolonged kneeling; their ergonomic design also provides knee support for all-day wear.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe lining helps prevent direct contact between your knees and the ground.\u003c\/li\u003e\n\u003cli\u003eThe pair weighs 6.35 oz (180 g), making it lightweight to wear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat are WORKPRO Garden Knee Pads made to withstand?\u003c\/h3\u003e\n\u003cp\u003eThe pads combine an Oxford surface with an EVA liner and heavy-duty nylon thread. Their flexible, tear-resistant construction is intended for wear on cement, asphalt, and rock, while the straps are made to resist ripping and tearing.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOxford surface and EVA liner form the kneepad construction.\u003c\/li\u003e\n\u003cli\u003eHeavy-duty nylon thread reinforces each knee pad.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill WORKPRO Garden Knee Pads fit, and what tasks suit them?\u003c\/h3\u003e\n\u003cp\u003eAdjust the flexible double straps to secure the pads to knees up to 20 inches (50.8 cm); easy-release slip-clips let you fasten and remove them. The fit is intended for men, women, teens, and seniors. Use them for gardening, roofing, flooring, construction, carpet installation, welding, carrying, cleaning, or stocking shelves.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDouble flexible straps hold the pads in place.\u003c\/li\u003e\n\u003cli\u003eSlip-clips provide an easy-release fastening.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese kneepads suit people who need cushioning and support for extended kneeling across home, garden, and work-site tasks. Their lightweight EVA padding, adjustable fit, and abrasion-resistant construction make them a practical choice for kneeling on hard or rough surfaces.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size knees do WORKPRO Garden Knee Pads fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Garden Knee Pads fit knees up to 20 inches (50.8 cm). Their flexible double straps adjust, and easy-release slip-clips secure the pads.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tasks are WORKPRO Garden Knee Pads designed for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Garden Knee Pads are designed for kneeling tasks such as gardening, roofing, flooring, construction, carpet installation, welding, carrying, cleaning, and stocking shelves.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57568791036282,"sku":"B0CM3H3Y6F","price":35.2,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-garden-knee-pads-front-view.jpg?v=1794737150"},{"product_id":"workpro-11-inch-extra-long-needle-nose-pliers-with-crv-steel-and-soft-grip","title":"WORKPRO 11-Inch Extra-Long Needle Nose Pliers with CRV Steel and Soft Grip","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO 11-inch extra long needle nose pliers are made for reaching hard-to-access parts and precise paper clamping, with chrome vanadium steel jaws heat-treated to 50 HRC.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e11-inch (27.94 cm) extra-long design — reaches parts that are difficult to access.\u003c\/li\u003e\n\u003cli\u003eChrome vanadium steel, heat-treated to 50 HRC — provides heavy-duty construction.\u003c\/li\u003e\n\u003cli\u003ePassed a critical test for the A4 clamping standard — gives you a tested clamping benchmark.\u003c\/li\u003e\n\u003cli\u003eLarge, soft TPR ergonomic grip — helps reduce hand fatigue and resist slipping.\u003c\/li\u003e\n\u003cli\u003eFive strengthening processes and rust protection — support hardness and durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen a task calls for reaching into a restricted space or applying controlled clamping, standard-length pliers may not provide the access you need. WORKPRO’s extended nose is designed for those hard-to-reach parts, while its paper-clamp precision makes it suitable for work that calls for careful clamping. The combination of tested clamping performance, treated steel and a cushioned grip brings the main practical details together in one hand tool.\u003c\/p\u003e\u003ch3\u003eHow do the extra-long jaws help with access?\u003c\/h3\u003e\u003cp\u003eThe 11-inch overall length is designed to help you reach parts that are difficult to get to with a shorter tool. The long-nose format supports access in tight or recessed working areas, while the paper-clamp precision design is intended for controlled clamping. Choose it for jobs where reaching the part and holding it accurately are both important.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade for hard-to-reach parts.\u003c\/li\u003e\n\u003cli\u003eDesigned for precision paper clamping.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat are the pliers made of, and how is the steel treated?\u003c\/h3\u003e\u003cp\u003eThe pliers are made from heavy-duty chrome vanadium steel and undergo five strengthening processes intended to improve hardness and durability. Heat treatment brings the steel to a hardness of up to 50 HRC. Rust protection is also part of the tool’s stated design.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel type: chrome vanadium.\u003c\/li\u003e\n\u003cli\u003eHeat-treated hardness: up to 50 HRC.\u003c\/li\u003e\n\u003cli\u003eFive strengthening processes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat does the grip feel like during use?\u003c\/h3\u003e\u003cp\u003eA large handle with a soft TPR surface and ergonomic shape is designed for a more comfortable hold. Its slip-resistant feel and cushioning are intended to help reduce hand fatigue during use. The grip is a functional part of the design, alongside the extended reach and clamping purpose.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSoft TPR grip material.\u003c\/li\u003e\n\u003cli\u003eLarge, ergonomic handle design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat quality testing and design details should I know?\u003c\/h3\u003e\u003cp\u003eEach WORKPRO pair has passed a critical test for the A4 clamping standard. This is a stated test result, not a separate certification claim. The tool is part of WORKPRO’s third-generation design, and its manufacturer is described as a globally recognized tool supplier focused on consistent performance and reliability.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTested against the A4 clamping standard.\u003c\/li\u003e\n\u003cli\u003eThird-generation design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese pliers suit people who need extended reach, precise clamping and a soft, ergonomic handle in a hand tool made for hard-to-access parts. Their 11-inch length, treated chrome vanadium steel and TPR grip bring those requirements together.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long are the WORKPRO needle nose pliers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO needle nose pliers are 11 inches (27.94 cm) long and are designed to reach hard-to-access parts.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What material are the WORKPRO needle nose pliers made from?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO needle nose pliers are made from heavy-duty chrome vanadium steel, heat-treated to a hardness of up to 50 HRC.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57568801292666,"sku":"B0C1YRR9ZS","price":32.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-needle-nose-pliers-front-view.jpg?v=1794737617"},{"product_id":"workpro-8-inch-mini-bolt-cutter-for-wire-and-cable-spring-loaded-with-anti-slip-grip","title":"WORKPRO 8-Inch Mini Bolt Cutter for Wire and Cable, Spring-Loaded with Anti-Slip Grip","description":"\u003cp\u003eWORKPRO Mini Bolt Cutter is an 8-inch (20.32 cm) spring-loaded cutter for thin bolts, wires and cables, with a maximum cutting capacity of 2.3mm (3\/23in.).\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrop-forged, heat-treated steel with hardness up to 65 HRC — made for cutting tasks requiring durable steel blades.\u003c\/li\u003e\n\u003cli\u003e2.3mm (3\/23in.) maximum cutting capacity — suited to thin bolts, wires and cables.\u003c\/li\u003e\n\u003cli\u003e8-inch mini format — fits in a tool bag for portable work and transport.\u003c\/li\u003e\n\u003cli\u003eLeverage design and aligned blades — provide added cutting strength with less effort.\u003c\/li\u003e\n\u003cli\u003ePatented third-generation anti-slip grip and built-in handle lock — support a comfortable hold and compact storage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor electricians and other hands-on workers, carrying a cutter for small-scale wire and bolt jobs can make a tool kit more useful without taking up the space of a larger cutter. The WORKPRO mini format is designed for portable cutting tasks where the material is within its stated capacity.\u003c\/p\u003e\u003ch3\u003eWhat can the WORKPRO Mini Bolt Cutter cut?\u003c\/h3\u003e\u003cp\u003eIt is intended for thin bolts, wires and cables within its 2.3mm (3\/23in.) maximum cutting capacity. The drop-forged, heat-treated steel construction has a hardness of up to 65 HRC. Cutting locks is not recommended, so this tool is intended for the listed small cutting tasks rather than locks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse for thin bolts, wires and cables.\u003c\/li\u003e\n\u003cli\u003eMaximum cutting capacity: 2.3mm (3\/23in.).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does its design help with cutting?\u003c\/h3\u003e\u003cp\u003eThe classic leverage design works with precisely aligned blades to add cutting strength while requiring less effort. Its spring-loaded construction and soft, third-generation grip are designed for controlled handling; the patented grip has an anti-slip surface.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrecisely aligned blades.\u003c\/li\u003e\n\u003cli\u003eSoft anti-slip handle with an ergonomic grip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWill it fit in a tool bag and store compactly?\u003c\/h3\u003e\u003cp\u003eYes. The 8-inch mini size is made to fit in a tool bag and support secure transport. A built-in handle lock makes the cutter easier to store when it is not in use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompact size for carrying with work tools.\u003c\/li\u003e\n\u003cli\u003eBuilt-in lock for storage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis cutter suits electricians and other users handling thin bolts, wires or cables who want a compact tool with a spring-loaded design and a grip made for a secure hold. It is not recommended for cutting locks. Its 8-inch size, stated 2.3mm (3\/23in.) cutting capacity and built-in handle lock define its fit for portable, small-scale cutting work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum cutting capacity of the WORKPRO Mini Bolt Cutter?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Mini Bolt Cutter has a maximum cutting capacity of 2.3mm (3\/23in.) and is intended for thin bolts, wires and cables.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the WORKPRO Mini Bolt Cutter cut locks?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Cutting locks with the WORKPRO Mini Bolt Cutter is not recommended; it is intended for thin bolts, wires and cables within its capacity.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57568801816954,"sku":"B09PYMRH63","price":32.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-mini-bolt-cutter-front-view.jpg?v=1794737638"},{"product_id":"workpro-garden-knee-pads-adjustable-20-inch-fit-with-thick-eva-cushion","title":"WORKPRO Garden Knee Pads, Adjustable 20-Inch Fit with Thick EVA Cushion","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Garden Knee Pads are unisex kneeling cushions for gardening and other floor-level tasks, with a thicker EVA foam cushion and adjustable straps for knees up to 20 inches (50.8 cm).\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThicker EVA foam cushion with soft lining — cushions the knees and keeps them from direct contact with the ground.\u003c\/li\u003e\n\u003cli\u003eOne pair weighs 6.35 oz (180 g) — lightweight support for extended wear.\u003c\/li\u003e\n\u003cli\u003eOxford surface, EVA liner and heavy-duty nylon thread — resist abrasion and tearing on cement, asphalt and rock.\u003c\/li\u003e\n\u003cli\u003eDouble flexible straps and easy-release slip-clips — provide an adjustable, secure fit.\u003c\/li\u003e\n\u003cli\u003eFits knees up to 20 inches (50.8 cm) — suitable for men, women, teens and seniors within that fit limit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRepeated kneeling for gardening, flooring or construction work can put pressure on knees and expose them to hard, rough surfaces. WORKPRO knee pads add a cushioned layer between the knees and the ground, with a lightweight design for tasks that call for kneeling over longer periods.\u003c\/p\u003e\u003ch3\u003eHow do WORKPRO knee pads cushion your knees?\u003c\/h3\u003e\u003cp\u003eThe thicker EVA foam cushion and soft lining help prevent knee discomfort and reduce stress and fatigue during long-lasting kneeling tasks. The lining separates the knees from direct contact with the ground, while the ergonomic design provides support as you work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMade for kneeling tasks that may last for hours.\u003c\/li\u003e\n\u003cli\u003eProvides a cushioned layer between your knees and the work surface.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow do the straps fit, and what knee size do they suit?\u003c\/h3\u003e\u003cp\u003eAdjust the double flexible straps around your legs and secure the pads with the easy-release slip-clips. They are suitable for knees up to 20 inches (50.8 cm), with the adjustable design made for men, women, teens and seniors.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjustable straps help keep the pads attached securely.\u003c\/li\u003e\n\u003cli\u003eOne pair weighs 6.35 oz (180 g) for lightweight wear.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eGood to know: compare your knee measurement with the 20-inch maximum fit before choosing these pads.\u003c\/p\u003e\u003ch3\u003eWhat tasks and surfaces are these knee pads made for?\u003c\/h3\u003e\u003cp\u003eWORKPRO knee pads are designed for gardening, roofing, flooring, construction work, carpet installation, welding, carrying, cleaning and other tasks that need knee support. Their Oxford surface, EVA liner, heavy-duty nylon thread and strong straps are made to withstand abrasion on cement, asphalt and rock. The tear-resistant, flexible construction is designed to last far longer than other knee pads.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuitable for use at construction sites and while stocking shelves.\u003c\/li\u003e\n\u003cli\u003eFlexible construction supports movement during varied work tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWORKPRO Garden Knee Pads suit adults, teens and seniors who need lightweight cushioning for kneeling work, provided their knees are within the stated fit limit. Their EVA cushion, adjustable straps and abrasion-resistant construction are made for extended kneeling across gardening and other hands-on tasks.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What knee size do WORKPRO Garden Knee Pads fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Garden Knee Pads fit knees up to 20 inches (50.8 cm). Their adjustable straps are suitable for men, women, teens and seniors within that limit.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tasks are WORKPRO Garden Knee Pads designed for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Garden Knee Pads provide cushioning for gardening, roofing, flooring, construction, carpet installation, welding, carrying, cleaning and other kneeling tasks.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57568845562234,"sku":"B08TH1XDD3","price":34.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-knee-pads-pair-front-view.jpg?v=1794739494"},{"product_id":"workpro-64mm-14-flute-toyota-oil-filter-wrench-in-precision-aluminum","title":"WORKPRO 64mm 14-Flute Toyota Oil Filter Wrench in Precision Aluminium","description":"\u003cp\u003eThe WORKPRO 64mm 14-flute oil filter wrench removes Toyota cartridge-style oil filter caps on 1.8L to 5.7L engines, with a precision-machined aluminum body and hub.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits Toyota cartridge-style filter caps across 1.8L to 5.7L engines — covers a wide range of Toyota, Lexus and Scion applications.\u003c\/li\u003e\n\u003cli\u003e64mm, 14-flute profile — engages the cap’s fluted surface for controlled removal.\u003c\/li\u003e\n\u003cli\u003e6061-T6 aluminum body and 7075-T6 aluminum drive hub — gives the tool a purpose-built aluminum construction.\u003c\/li\u003e\n\u003cli\u003eAccepts a 3\/8-inch (9.5 mm) drive ratchet or extensions, plus 24 mm (0.94 in) or 15\/16-inch (23.8 mm) sockets — works with several common drive options.\u003c\/li\u003e\n\u003cli\u003eLaser-etched size and logo with anodized finishes — makes the wrench identifiable and adds corrosion resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eCartridge-style oil filter caps need a wrench that matches their fluted shape to remove them with control. This WORKPRO tool is made for oil changes on compatible Toyota-family vehicles, whether the job is done at home or in a professional setting. Its 14-flute profile engages the cap rather than relying on a generic gripping surface.\u003c\/p\u003e\u003ch3\u003eWhich Toyota, Lexus or Scion engines does this wrench fit?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO wrench fits Toyota cartridge-style oil filter caps used with 1.8L to 5.7L engines. Compatible examples include the Camry, Tundra, Tacoma, 4Runner, RAV4, Highlander and Prius, along with other compatible Toyota, Lexus and Scion applications. It is designed to accommodate both small and large filter housings.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFor cartridge-style oil filter caps.\u003c\/li\u003e\n\u003cli\u003eVehicle examples include Camry, Tundra, Tacoma, 4Runner, RAV4, Highlander and Prius.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does the 14-flute shape help during filter removal?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO oil filter wrench has 14 machined flutes that grip the fluted section of the filter cap. Its gapless design is intended to reduce slipping and the chance of cracking or breaking the cap’s tabs, helping lower the risk of damage and leaks during removal.\u003c\/p\u003e\u003cp\u003eMatching the wrench profile to the cap gives the tool a defined contact surface as you turn it. This makes it suitable for controlled filter-cap removal rather than gripping the housing by its outer edges.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e14 flutes engage the cap’s fluted section.\u003c\/li\u003e\n\u003cli\u003eThe gapless profile helps protect cap tabs from damage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat ratchet or socket can I use with it?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO wrench works with a standard 3\/8-inch (9.5 mm) drive ratchet, a compatible extension, or a 24 mm (0.94 in) or 15\/16-inch (23.8 mm) socket. These drive choices let you connect the tool using equipment suited to your oil-change setup.\u003c\/p\u003e\u003cp\u003eAttach the wrench to the drive option you are using, seat it on the oil filter cap, and turn to remove the cap. The tool is designed for installation and removal, and its matched flute profile helps keep the wrench engaged as you work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCompatible with 3\/8-inch drive ratchets and extensions.\u003c\/li\u003e\n\u003cli\u003eAlso accepts 24 mm or 15\/16-inch sockets.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat is the wrench made from, and how is its size identified?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO oil filter wrench has a 6061-T6 aluminum body and a 7075-T6 aluminum drive hub, both precision CNC machined. The body is anodized grey and the hub anodized blue; the anodized finish provides corrosion resistance.\u003c\/p\u003e\u003cp\u003eA laser-etched size and logo make the tool easier to identify when selecting it for a compatible filter cap. Its separate body and drive-hub materials are specified for each component, while the machined 14-flute shape supplies the cap contact profile.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGrey anodized 6061-T6 aluminum body.\u003c\/li\u003e\n\u003cli\u003eBlue anodized 7075-T6 aluminum drive hub.\u003c\/li\u003e\n\u003cli\u003eLaser-etched size and logo for quick identification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis wrench suits DIY vehicle owners and automotive professionals working on compatible Toyota, Lexus or Scion cartridge-style oil filter systems. It is intended for those filter caps, with a 64mm, 14-flute profile and several common drive options for removal and installation.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles does the WORKPRO oil filter wrench fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO oil filter wrench fits Toyota cartridge-style oil filter caps for 1.8L to 5.7L engines, including compatible Camry, Tundra, Tacoma, 4Runner, RAV4, Highlander and Prius applications.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What drive tools work with the WORKPRO oil filter wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO oil filter wrench accepts a standard 3\/8-inch drive ratchet or extension, as well as a 24 mm or 15\/16-inch socket.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57568916144506,"sku":"B0DB52CT11","price":49.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-oil-filter-wrench-front-view_61b3a557-83b2-4933-9f65-e2001c4bae84.jpg?v=1794742079"},{"product_id":"workpro-adjustable-wrench-set-6-inch-10-inch-wide-jaws-and-metric-scales","title":"WORKPRO Adjustable Wrench Set, 6-Inch \u0026 10-Inch, Wide Jaws and Metric Scales","description":"\u003cp\u003eThe WORKPRO adjustable wrench set contains 6-inch (15.2 cm) and 10-inch (25.4 cm) wrenches for household repairs, plumbing fixes, furniture assembly, bike repairs, and garage work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDrop-forged Chrome Vanadium Steel — made for home and workshop use.\u003c\/li\u003e\n\u003cli\u003eCorrosion-resistant black oxide finish — helps protect the wrench surfaces from corrosion.\u003c\/li\u003e\n\u003cli\u003eLaser-etched SAE and metric scales on both sides — supports quick jaw alignment.\u003c\/li\u003e\n\u003cli\u003eJaw capacities of 15\/16 inch (24 mm) and 1-5\/16 inches (33 mm) — accommodates a range of nuts and bolts.\u003c\/li\u003e\n\u003cli\u003eRubberized handles and hanging holes — provide a comfortable grip and convenient storage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor everyday repairs, a pair of adjustable wrenches offers two jaw sizes for different fasteners without requiring a fixed-size wrench for every task. WORKPRO designed this set for DIYers and homeowners tackling jobs around the house, garage, or workshop, including plumbing fixes, furniture assembly, and bike repairs.\u003c\/p\u003e\u003ch3\u003eWhat jobs is the WORKPRO wrench set made for?\u003c\/h3\u003e\u003cp\u003eThe set is intended for everyday household tasks and home or workshop use. Its 6-inch and 10-inch lengths give you two wrench sizes for general repairs, from furniture assembly to garage jobs. These tools are not designed for industrial or high-stress mechanical tasks.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse for household plumbing fixes, bike repairs, and furniture assembly.\u003c\/li\u003e\n\u003cli\u003eChoose between two wrench lengths for different repair situations.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat fastener sizes can these adjustable wrenches fit?\u003c\/h3\u003e\u003cp\u003eThe 6-inch wrench opens to 15\/16 inch (24 mm), while the 10-inch wrench opens to 1-5\/16 inches (33 mm). The smaller wrench suits nuts and bolts from M6 to M14; the larger wrench fits up to M20. Compare the fastener with the maximum jaw opening before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e6-inch wrench: maximum jaw capacity of 15\/16 inch (24 mm).\u003c\/li\u003e\n\u003cli\u003e10-inch wrench: maximum jaw capacity of 1-5\/16 inches (33 mm).\u003c\/li\u003e\n\u003cli\u003eAvoid rusted or oversized fasteners that exceed the jaw capacity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow do the wrenches adjust and feel in use?\u003c\/h3\u003e\u003cp\u003eA smooth worm gear adjusts each jaw, while the laser-etched SAE and metric scales on both sides help you align it with a fastener. The gear provides controlled adjustment and a grip designed to avoid slippage. Rubberized ergonomic handles are made to reduce hand strain during extended use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSAE and metric scales are etched on both sides of each wrench.\u003c\/li\u003e\n\u003cli\u003eThe adjustable worm gear controls jaw movement.\u003c\/li\u003e\n\u003cli\u003eHanging holes make storage easier, and the set fits standard toolboxes or bags.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis set suits DIYers and homeowners who need adjustable wrenches for routine repairs and varied household fasteners. Its two wrench lengths, defined jaw capacities, and home-use design make it a practical fit for everyday tasks rather than industrial or high-stress mechanical work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What fastener sizes fit the WORKPRO adjustable wrench set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO adjustable wrench set fits nuts and bolts from M6 to M14 with the 6-inch wrench and up to M20 with the 10-inch wrench.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tasks is the WORKPRO adjustable wrench set designed for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO adjustable wrench set is designed for everyday household jobs such as plumbing fixes, furniture assembly, bike repairs, and garage work.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57568981385594,"sku":"B08RJ55NPF","price":37.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-adjustable-wrench-set-front-view.jpg?v=1794744750"},{"product_id":"workpro-extra-thick-kneeling-pad-1-5-inch-nbr-foam-cushion-with-carry-handle","title":"WORKPRO Extra-Thick Kneeling Pad, 1.5-Inch NBR Foam Cushion with Carry Handle","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO kneeling pad is a cushioned NBR foam mat designed to make extended kneeling more comfortable, with 1.5-inch (3.81 cm) foam and 70% shock absorbency.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNBR foam resists oil and abrasion — suited to demanding work and outdoor surfaces.\u003c\/li\u003e\n\u003cli\u003eWater-resistant construction absorbs minimal water — easier to clean and quick to dry after outdoor use.\u003c\/li\u003e\n\u003cli\u003eTextured underside — helps prevent slipping and sliding while you work.\u003c\/li\u003e\n\u003cli\u003eBuilt-in handle — makes the pad easier to carry between tasks.\u003c\/li\u003e\n\u003cli\u003eMade for gardening, exercise, yoga, auto repair, household chores, and more — one pad serves a range of kneeling activities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHard or damp ground can make gardening, repairs, and household tasks uncomfortable when they involve kneeling for long periods. This foam mat provides a cushioned surface for those jobs, as well as activities such as baby bath time, camping, and sports events.\u003c\/p\u003e\n\u003ch3\u003eHow much cushioning does the WORKPRO kneeling pad provide?\u003c\/h3\u003e\n\u003cp\u003eThe pad uses high-density foam to provide 70% shock absorbency for long-term kneeling work. Its 1.5-inch (3.81 cm) thickness creates a cushioning layer between your knees and the ground, while the smooth, soft top is designed for comfortable contact.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe thick foam is compression-resistant and designed not to compress or deform over time.\u003c\/li\u003e\n\u003cli\u003eThe smooth surface is designed to avoid leaving marks on knees during long-term use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan I use the WORKPRO kneeling pad on damp or rough ground?\u003c\/h3\u003e\n\u003cp\u003eYes. Its NBR foam is water-resistant and absorbs minimal water, so the pad is suitable for moist outdoor ground and is easy to clean and quick to dry. The material also has oil and abrasion resistance for work around rocks and rubble.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade to withstand contact with rocks and rubble.\u003c\/li\u003e\n\u003cli\u003eWater-resistant rather than described as fully waterproof.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat tasks is the WORKPRO kneeling pad designed for?\u003c\/h3\u003e\n\u003cp\u003eThe built-in handle supports carrying it between different jobs and activities. Use it for gardening, workouts, exercise and yoga, baby bath time, sports events, camping, everyday household chores, or auto repair.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for indoor household tasks as well as outdoor activities.\u003c\/li\u003e\n\u003cli\u003eThe textured bottom helps keep the mat from sliding during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe WORKPRO kneeling pad is a practical fit for gardeners, home improvers, and anyone whose tasks involve spending time on their knees. Its thick NBR foam cushioning and range of intended uses make it suitable for both outdoor jobs and everyday activities, rather than only one type of kneeling task.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How thick is the WORKPRO kneeling pad, and how much shock absorbency does it provide?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO kneeling pad has 1.5-inch (3.81 cm) high-density foam and provides 70% shock absorbency for kneeling work.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the WORKPRO kneeling pad be used on damp ground?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The WORKPRO kneeling pad is water-resistant and absorbs minimal water, making it suitable for moist outdoor ground and easy to clean and quick to dry.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57569689895290,"sku":"B0BVVDC3KH","price":31.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-kneeling-pad-front-view.jpg?v=1794756463"},{"product_id":"workpro-extra-thick-kneeling-pad-1-5-inch-nbr-foam-cushion-with-carry-handle-1","title":"WORKPRO Extra Thick Kneeling Pad, 1.5-Inch NBR Foam Cushion with Carry Handle, Blue","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO Extra Thick Kneeling Pad is an NBR foam cushion for kneeling during work and everyday activities, with 1.5-inch-thick (3.81 cm) high-density foam designed to provide 70% shock absorbency.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.5-inch-thick high-density foam — cushions knees during extended kneeling.\u003c\/li\u003e\n\u003cli\u003e70% shock absorbency — helps reduce impact while working on the ground.\u003c\/li\u003e\n\u003cli\u003eNBR foam resists oil and abrasion — made to handle rocks, rubble and moist outdoor ground.\u003c\/li\u003e\n\u003cli\u003eSmooth top and textured bottom — offers a soft knee-contact surface and helps limit slipping.\u003c\/li\u003e\n\u003cli\u003eBuilt-in handle — makes the pad convenient to carry between tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eGround-level jobs and activities can mean spending extended periods on your knees, whether you are tending plants, repairing a vehicle or doing household tasks. This cushioned mat is made for those jobs as well as workouts, yoga, baby bath time, sports events and camping. Its foam construction pairs cushioning with resistance to outdoor dirt and moisture, while the handle supports carrying it where it is needed.\u003c\/p\u003e\n\u003ch3\u003eHow does the WORKPRO kneeling pad cushion your knees?\u003c\/h3\u003e\n\u003cp\u003eThe thick, high-density NBR foam is designed to absorb shock during long periods of kneeling. Its smooth, soft surface is intended to help prevent marks on the knees with long-term use. The substantial foam layer provides a cushioned place to kneel for work or exercise on the ground.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from NBR foam.\u003c\/li\u003e\n\u003cli\u003eDesigned for extended kneeling tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan I use the WORKPRO kneeling pad outdoors?\u003c\/h3\u003e\n\u003cp\u003eYes, the pad is water-resistant and absorbs minimal water, making it suitable for use on moist ground. NBR resists oil and abrasion, and the pad is designed to withstand rocks and rubble. Minimal water absorption also helps make it easy to clean and quick to dry after outdoor use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSuitable for gardening and camping.\u003c\/li\u003e\n\u003cli\u003eAlso useful for auto repair and everyday household chores.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat helps keep the WORKPRO kneeling pad in place and ready to carry?\u003c\/h3\u003e\n\u003cp\u003eThe textured underside helps prevent slipping and sliding during use, while the built-in handle makes it easier to move the pad between work areas. Its thick foam is compression-resistant and designed not to compress or deform over time with continued use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse it for workouts, exercise and yoga, baby bath time or sports events.\u003c\/li\u003e\n\u003cli\u003eCarry it by the built-in handle between activities.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe WORKPRO kneeling pad suits gardeners, home workers, auto repair tasks and anyone who kneels for exercise or other ground-level activities. Its foam cushioning, moisture resistance, textured underside and carry handle make it a practical fit for kneeling tasks indoors or outdoors.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What activities is the WORKPRO Extra Thick Kneeling Pad made for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO kneeling pad is made for gardening, workouts, baby bath time, exercise and yoga, sports events, camping, household chores and auto repair.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Is the WORKPRO Extra Thick Kneeling Pad suitable for moist outdoor ground?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The WORKPRO kneeling pad is water-resistant, absorbs minimal water and is designed to handle moist ground, rocks and rubble.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57569728823674,"sku":"B0D72S8J41","price":31.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-kneeling-pad-front-view_183a0d81-d66c-4663-8e52-4f8a2ea4aa90.jpg?v=1794758125"},{"product_id":"workpro-extra-thick-kneeling-pad-1-5-inch-nbr-foam-with-carry-handle","title":"WORKPRO Extra Thick Kneeling Pad, 1.5-Inch NBR Foam with Carry Handle","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO kneeling pad is a cushioned mat for prolonged kneeling work, made with 1.5-inch (3.81 cm) high-density NBR foam.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProvides 70% shock absorbency — adds cushioning for tasks that keep you on your knees.\u003c\/li\u003e\n\u003cli\u003eWater-resistant NBR foam absorbs minimal water — helps make outdoor use and cleanup easier.\u003c\/li\u003e\n\u003cli\u003eNBR resists oil and abrasion — suited to work around rocks, rubble, and moisture.\u003c\/li\u003e\n\u003cli\u003eSmooth top and textured bottom — supports knee comfort and helps limit sliding during use.\u003c\/li\u003e\n\u003cli\u003eBuilt-in handle — makes the pad useful across gardening, exercise, household chores, and more.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWorking close to the ground can mean extended time on your knees, whether you are gardening, repairing a vehicle, or completing household tasks. WORKPRO combines thick foam cushioning with a water-resistant NBR construction for indoor and outdoor jobs, plus a handle for carrying the pad between activities.\u003c\/p\u003e\n\u003ch3\u003eHow much cushioning does the WORKPRO kneeling pad provide?\u003c\/h3\u003e\n\u003cp\u003eThe pad uses 1.5-inch (3.81 cm) thick, high-density foam and provides 70% shock absorbency for kneeling work. Its smooth, soft surface is designed to feel comfortable against the knees; the product is also designed so long-term use will not leave marks on them. This cushioning is intended for jobs that involve spending extended periods kneeling rather than simply moving from one standing task to another.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHigh-density NBR foam forms the cushioning layer.\u003c\/li\u003e\n\u003cli\u003eThe 70% shock-absorbency figure applies to the pad's cushioning.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan I use the WORKPRO kneeling pad on damp or rough ground?\u003c\/h3\u003e\n\u003cp\u003eYes, the NBR foam is water-resistant and absorbs minimal water, making the pad suitable for use on moist ground. Its NBR material also has oil and abrasion resistance, and the pad is designed to withstand contact with rocks and rubble. Minimal water absorption helps with cleaning and drying after outdoor tasks. The textured bottom is designed to help keep the pad from slipping or sliding while you work.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade for use around moisture, rocks, and rubble.\u003c\/li\u003e\n\u003cli\u003eMinimal water absorption supports easier cleaning and quicker drying.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWill the WORKPRO kneeling pad hold its shape with repeated use?\u003c\/h3\u003e\n\u003cp\u003eThe thick, solid foam construction is designed for long-term use, with compression resistance intended to help prevent the pad from compressing or deforming over time. That construction makes it useful for recurring tasks such as garden work, auto repair, or household chores where kneeling is part of the job. Its smooth upper surface and textured underside serve different purposes: comfort for your knees and traction against the ground.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThick foam is designed to resist compression and deformation over time.\u003c\/li\u003e\n\u003cli\u003eThe soft upper surface and textured underside support comfort and stability during use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat activities is the WORKPRO kneeling pad made for?\u003c\/h3\u003e\n\u003cp\u003eThe built-in handle and cushioned design make this pad suitable for gardening, workouts, exercise and yoga, sports events, camping, baby bath time, everyday household chores, and auto repair. The range covers indoor and outdoor activities, from kneeling to complete a practical task to bringing a cushion along for exercise or an event.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse it for gardening, auto repair, and household chores.\u003c\/li\u003e\n\u003cli\u003eIt also suits workouts, yoga, sports events, camping, and baby bath time.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe WORKPRO kneeling pad suits gardeners, home workers, and anyone whose routine includes extended kneeling or varied activities that benefit from a portable foam cushion. It is made for cushioning knees during work and recreation, with NBR foam, a built-in handle, and a textured underside.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How thick is the WORKPRO kneeling pad?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO kneeling pad has 1.5-inch (3.81 cm) thick, high-density NBR foam and provides 70% shock absorbency.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What activities can I use the WORKPRO kneeling pad for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO kneeling pad is made for gardening, workouts, yoga, sports events, camping, baby bath time, household chores, and auto repair.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57569729085818,"sku":"B0D72Z8HMN","price":37.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-kneeling-pad-front-view_01e3dccc-39a3-4e51-907b-d47a2c2e79d1.jpg?v=1794758125"},{"product_id":"workpro-adjustable-oil-filter-wrench-2-3-8-to-3-3-4-in-magnetic-3-jaw-tool","title":"WORKPRO Adjustable Oil Filter Wrench, 2-3\/8 to 3-3\/4 in, Magnetic 3-Jaw Tool","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO adjustable oil filter wrench is a magnetic removal tool for engine filters, conduit, and fittings, fitting diameters from 2-3\/8 to 3-3\/4 inches (60 to 95 millimeters).\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFits 2-3\/8 to 3-3\/4-inch (60 to 95-millimeter) diameters — covers a range of filter and fitting sizes.\u003c\/li\u003e\n\u003cli\u003eWorks with a 3\/8-inch square driver or 5\/8-inch wrench or socket — supports two drive options.\u003c\/li\u003e\n\u003cli\u003eThree adjustable, rotating jaws with a magnetic design — help grip filters during removal.\u003c\/li\u003e\n\u003cli\u003eFriction grip and drop-forged steel — provide torque and reliable engagement.\u003c\/li\u003e\n\u003cli\u003eHand-friendly ergonomic body — is designed for a more comfortable user experience.\u003c\/li\u003e\n\u003cli\u003eMaterials comply with environmental protection requirements; total content of three o-phenols is below 1000 ppm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eRemoving an engine filter can be difficult when the filter is tight or access is limited. The WORKPRO wrench is made for filter removal in vehicles and tight spaces, and its stated applications also include conduit and fittings. Its adjustable range helps you match the tool to the diameter before choosing a compatible drive.\u003c\/p\u003e\u003ch3\u003eWhat filter sizes and drive tools does the WORKPRO wrench fit?\u003c\/h3\u003e\u003cp\u003eThe wrench fits diameters from 2-3\/8 to 3-3\/4 inches (60 to 95 millimeters) and can be driven with either a 3\/8-inch square driver tool or a 5\/8-inch wrench or socket. Compare the filter or fitting diameter with this range, then use one of the two supported drive options. This gives you a clear fit check before starting work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDiameter range: 2-3\/8 to 3-3\/4 inches (60 to 95 millimeters).\u003c\/li\u003e\n\u003cli\u003eDrive options: 3\/8-inch square driver, or 5\/8-inch wrench or socket.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow do the jaws grip an oil filter?\u003c\/h3\u003e\u003cp\u003eThree adjustable, rotating legs fit around the filter, while the friction design helps the tool hold its grip. The magnetic design is another part of the removal tool’s gripping setup. Drop-forged steel provides the tool’s torque and reliability, making this arrangement suited to filters that are difficult to remove, including those in tight spaces.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree legs rotate and adjust to the filter.\u003c\/li\u003e\n\u003cli\u003eFriction grip and magnetic design support engagement during removal.\u003c\/li\u003e\n\u003cli\u003eDrop-forged steel is used in the tool’s construction.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat jobs is this WORKPRO tool designed for?\u003c\/h3\u003e\u003cp\u003eThe WORKPRO wrench is intended for removing vehicle oil filters and is also suited to conduit and fittings. Its hand-friendly body and ergonomic design are intended to improve the user experience while working. The manufacturer is a globally recognized tool supplier and presents consistent performance and reliability as product qualities. The materials comply with environmental protection requirements, with total content of three o-phenols below 1000 ppm.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eApplications include engine filters, conduit, and fittings.\u003c\/li\u003e\n\u003cli\u003eThe ergonomic body is designed with hand comfort in mind.\u003c\/li\u003e\n\u003cli\u003eTotal content of three o-phenols: less than 1000 ppm.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis wrench suits vehicle owners and tool users who need an adjustable removal tool for filters within its diameter range, especially when working in limited access areas. It also serves jobs involving conduit and fittings, with two drive options for tool compatibility. Its adjustable jaws, friction grip, magnetic design, and drop-forged steel construction make it a fit for users seeking a wrench built around secure filter removal and a defined size range.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What filter diameter does the WORKPRO adjustable oil filter wrench fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO adjustable oil filter wrench fits filters and fittings from 2-3\/8 to 3-3\/4 inches (60 to 95 millimeters) in diameter.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What drive tools work with the WORKPRO adjustable oil filter wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO adjustable oil filter wrench accepts a 3\/8-inch square driver tool or a 5\/8-inch wrench or socket.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57569826931066,"sku":"B0BG8GRBJQ","price":32.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-adjustable-oil-filter-wrench-front-view.jpg?v=1794760049"},{"product_id":"workpro-carpenter-square-set-with-7-inch-rafter-square-and-12-inch-ruler","title":"WORKPRO Carpenter Square Set with 7-Inch Rafter Square and 12-Inch Ruler","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO Carpenter Square and Zinc-Alloy Square Ruler Set combines a 7-inch (17.8 cm) aluminum alloy rafter square with a combination square featuring a 12-inch (30.5 cm) stainless steel ruler for woodworking layout and measurement.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDie-cast, heavy-gauge aluminum alloy rafter square — supports measuring and marking for woodworking tasks.\u003c\/li\u003e\n\u003cli\u003eCombination square with a zinc-alloy body and stainless steel ruler — brings a second measuring tool into the set.\u003c\/li\u003e\n\u003cli\u003eThree ruler scale values: 1\/16 inch (1.6 mm), 1\/32 inch (0.8 mm), and 1 mm — gives you several graduations for reading measurements.\u003c\/li\u003e\n\u003cli\u003ePermanent deep markings and white graduations on the rafter square — make its scale easier to identify.\u003c\/li\u003e\n\u003cli\u003eLipped fence on the rafter square and a spring screw on the combination square — help brace the square against wood and detach the ruler.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis two-tool set is made for marking and measuring wood, including laying out straight or angled lines and guiding cross-cuts in lumber. The rafter square combines functions associated with framing, try, miter, and protractor squares; the combination square adds a sliding ruler, level vial, and metal scriber. Both tools work at 90-degree and 45-degree angles, making the set useful for common woodworking layout tasks.\u003c\/p\u003e\u003ch3\u003eWhat tools are included in the WORKPRO set?\u003c\/h3\u003e\u003cp\u003eThe set contains a 7-inch rafter square and a combination square with a 12-inch stainless steel ruler. The rafter square is die-cast from heavy-gauge aluminum alloy, while the combination-square body is die-cast from zinc alloy. Its ruler is stainless steel with a matte finish, providing a distinct metal ruler alongside the rafter square.\u003c\/p\u003e\u003cp\u003eThe two tools bring different layout features together without relying on a single square for every task. The rafter square can guide a cross-cut in lumber, while the combination square’s ruler slides for measurement and can be detached using its spring screw. This arrangement is suited to work that calls for both a square reference and a movable ruler.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eRafter square combines framing, try, miter, and protractor square functions.\u003c\/li\u003e\n\u003cli\u003eCombination square includes a detachable stainless steel ruler.\u003c\/li\u003e\n\u003cli\u003eBoth squares are designed to work at 90-degree and 45-degree angles.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow does the rafter square help with marking wood?\u003c\/h3\u003e\u003cp\u003eIts lipped fence braces flush against the wood, helping you draw a straight or angled line in proportion to the wood’s edge. The rafter square also serves as a guide for cross-cutting lumber, so it supports both marking and cut guidance during layout.\u003c\/p\u003e\u003cp\u003eFor scale visibility, the square has a low-glare protective powder-coated finish, permanent deep markings, and white graduations. These details make the graduations easier to distinguish in different lighting conditions. The markings are intended to remain identifiable with use, while the aluminum alloy construction forms the body of the tool.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eLipped fence provides a flush reference against the wood.\u003c\/li\u003e\n\u003cli\u003eScale combines several square functions in one rafter square.\u003c\/li\u003e\n\u003cli\u003eLow-glare finish and white graduations aid scale reading.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat measurement features does the combination square provide?\u003c\/h3\u003e\u003cp\u003eThe combination square uses a 12-inch stainless steel ruler with three minimum scale values: 1\/16 inch, 1\/32 inch, and 1 mm. Its scale is deeply etched for legibility, and the ruler’s matte finish reduces glare from its surface.\u003c\/p\u003e\u003cp\u003eA spring screw makes the ruler easier to detach, and the smooth ruler slides for measurement. The combination-square body also has an easy-to-read level vial and a metal scriber on its side. Together, these features support measurement and layout work in addition to the square’s 90-degree and 45-degree use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDeeply etched scale on the stainless steel ruler.\u003c\/li\u003e\n\u003cli\u003eSliding ruler can be detached with the spring screw.\u003c\/li\u003e\n\u003cli\u003eLevel vial and metal scriber add layout functions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe WORKPRO set suits woodworkers who want a rafter square for marking and cross-cut guidance alongside a combination square for sliding-ruler measurements. It brings aluminum alloy, zinc alloy, and stainless steel construction together with multiple scale and layout features. For woodworking tasks involving straight or angled lines, cross-cut guidance, and 90-degree or 45-degree references, the set provides both squares and their distinct functions.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What measurements are on the WORKPRO combination square ruler?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO combination square has a 12-inch stainless steel ruler with minimum scale values of 1\/16 inch, 1\/32 inch, and 1 mm.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the WORKPRO rafter square guide a cross-cut?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The WORKPRO rafter square can guide cross-cutting lumber and works at 90-degree and 45-degree angles.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570528362874,"sku":"B083143LDY","price":41.18,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-square-set-full-view.jpg?v=1794775348"},{"product_id":"workpro-6-in-1-linesman-pliers-8-inch-wire-cutter-and-stripper","title":"WORKPRO 6-in-1 Linesman Pliers, 8-Inch Wire Cutter and Stripper","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO 6-in-1 Linesman Pliers combine fastening, clamping, winding, cutting, crimping and stripping functions in an 8-inch (20.32 cm) tool for common electrical and repair tasks.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSix functions in one tool — handle fastening, clamping, winding, cutting, crimping and stripping tasks.\u003c\/li\u003e\n\u003cli\u003eStrips SLD 12, 14 and 16, plus STR 14, 16 and 18 wires — sized for the listed wire types without damaging the wire core.\u003c\/li\u003e\n\u003cli\u003e60Cr-V steel, overall heat treatment and a blackened surface — made for hardness, toughness and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003e40–50 HRC overall hardness, 55–65 HRC cutting-edge hardness and a 2.3 mm maximum steel-wire cutting diameter — gives clear specifications for choosing the tool.\u003c\/li\u003e\n\u003cli\u003eHigh-leverage design and a TPR non-slip grip — supports cutting effort and a secure, comfortable hold.\u003c\/li\u003e\n\u003cli\u003e8-inch overall length, 2-inch (5.08 cm) closed handle width and 5.5-inch (13.97 cm) handle length — provides the tool’s key size measurements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eElectrical, plumbing, carpentry and automotive work can call for several different hand-tool functions during a repair. These linesman pliers bring six operations together, with wire stripping and cutting capabilities alongside gripping and crimping functions. Their stated wire-size compatibility helps clarify whether they suit a particular stripping task, while the steel-wire limit helps define their cutting range.\u003c\/p\u003e\u003ch3\u003eWhat jobs can these linesman pliers do?\u003c\/h3\u003e\u003cp\u003eWORKPRO Linesman Pliers are designed for fastening, clamping, winding, cutting, crimping and stripping. Their side-cutting jaws can cut steel, copper and iron wire, as well as other common metals. The pliers can also grip and turn screws and nuts to fix or loosen them, making the tool relevant to work by electricians, plumbers, carpenters and car mechanics.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSix integrated functions cover a range of common gripping and wire tasks.\u003c\/li\u003e\n\u003cli\u003eSide cutters handle steel, copper and iron wire.\u003c\/li\u003e\n\u003cli\u003eJaw grip can be used to fix or loosen screws and nuts.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich wires can the WORKPRO pliers strip and cut?\u003c\/h3\u003e\u003cp\u003eThe stripping feature fits SLD 12, 14 and 16 wires and STR 14, 16 and 18 wires, and is designed to strip them without damaging the wire core. For cutting, the maximum stated diameter is 2.3 mm for steel wire; the pliers also cut copper wire, iron wire and other common metals. Use the wire type and diameter as the key fit points when choosing them for a task.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStripping sizes: SLD 12, 14, 16; STR 14, 16, 18.\u003c\/li\u003e\n\u003cli\u003eMaximum steel-wire cutting diameter: 2.3 mm.\u003c\/li\u003e\n\u003cli\u003eAlso suited to cutting copper wire, iron wire and other common metals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat are the materials, dimensions and grip details?\u003c\/h3\u003e\u003cp\u003eThe pliers are made from 60Cr-V steel with overall heat treatment and a blackened surface. The overall hardness is 40–50 HRC, and the cutting edge is 55–65 HRC. A high-leverage design supports cutting, while the TPR handle has an ergonomic, non-slip grip. The measured handle width is taken with the handles closed.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSteel construction: 60Cr-V with overall heat treatment.\u003c\/li\u003e\n\u003cli\u003eBlackened surface is intended to resist corrosion and rust.\u003c\/li\u003e\n\u003cli\u003eHandle material: TPR, with an ergonomic non-slip design.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese pliers suit electricians and other tradespeople who need a single hand tool for a mix of wire, gripping and fastening tasks, as well as home or vehicle repair work involving common metals. Their stated stripping sizes, steel-wire cutting limit and compact 8-inch format make their intended fit easy to compare with the job at hand.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which wire sizes can WORKPRO 6-in-1 Linesman Pliers strip?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO 6-in-1 Linesman Pliers strip SLD 12, 14 and 16 wires, plus STR 14, 16 and 18 wires, without damaging the wire core.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum steel-wire cutting diameter for WORKPRO Linesman Pliers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Linesman Pliers have a maximum cutting diameter of 2.3 mm for steel wire and can also cut copper wire, iron wire and other common metals.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570529083770,"sku":"B0BKK1VKDX","price":34.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-linesman-pliers-front-view_335594ff-962a-4088-b16c-caa3196e001f.jpg?v=1794775389"},{"product_id":"workpro-bucket-tool-organizer-51-pockets-for-3-5-5-gallon-buckets-waterproof-600d-polyester","title":"WORKPRO Bucket Tool Organiser, 51 Pockets for 13–19 L Buckets, Waterproof 600D Polyester","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO Bucket Tool Organizer turns a standard bucket into a tool-carrying and storage setup, with 51 pockets and 600D polyester construction.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFits most standard 3.5–5-gallon (13.2–18.9 L) buckets — choose a compatible bucket for a portable tool setup.\u003c\/li\u003e\n\u003cli\u003eWaterproof, tear-proof fabric with a 33 lb (15 kg) load capacity — organize tools for carrying or storage.\u003c\/li\u003e\n\u003cli\u003e41 exterior pockets in triple rows and 10 interior pockets — separate tools and accessories by where you need them.\u003c\/li\u003e\n\u003cli\u003eTwo loop handle straps — hold hammers, drills, pry bars, and other long tools.\u003c\/li\u003e\n\u003cli\u003eTape measure clip and tape loop — keep measuring tools accessible.\u003c\/li\u003e\n\u003cli\u003eDrill pocket with a hook-and-loop handle strap — help secure a drill in its pocket.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLoose hand tools, power tools, and accessories can be difficult to keep together when moving between jobs or storing equipment. This bucket organizer is made to bring them into one portable arrangement, using a compatible bucket as the base. Its pocket layout gives smaller accessories and larger tools designated places, while the exterior straps provide another way to carry long tools.\u003c\/p\u003e\n\u003ch3\u003eWhat does the WORKPRO organizer hold?\u003c\/h3\u003e\n\u003cp\u003eIt organizes hand tools, power tools, and accessories across 51 pockets. The layout combines 41 exterior pockets set in triple rows with 10 pockets inside, so tools can be sorted between the outside and inside storage areas.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse the drill pocket’s hook-and-loop strap to secure the drill handle.\u003c\/li\u003e\n\u003cli\u003eKeep tape measures handy with the clip and tape loop.\u003c\/li\u003e\n\u003cli\u003eUse the two loop straps for hammers, drills, pry bars, and other long tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich buckets does it fit?\u003c\/h3\u003e\n\u003cp\u003eThe WORKPRO Bucket Tool Organizer is designed to fit most standard buckets from 3.5 to 5 gallons (13.2 to 18.9 L). Match your bucket’s capacity to this range when choosing a fit; compatibility is stated for most standard buckets, not every bucket shape.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBucket capacity range: 3.5–5 gallons.\u003c\/li\u003e\n\u003cli\u003eThe bucket provides the base for carrying or storing the organized tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is the organizer made from, and how much can it carry?\u003c\/h3\u003e\n\u003cp\u003eThe WORKPRO organizer is made from 600D polyester and has a stated load capacity of 33 lb (15 kg). Its waterproof, tear-proof construction is intended for organizing tools, while the pocketed design helps keep equipment grouped during transport or storage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 600D polyester.\u003c\/li\u003e\n\u003cli\u003eDesigned to carry hand tools, power tools, and accessories.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis organizer suits people who want to keep a range of tools together in a bucket-based setup, including during transport or between storage and work areas. It is designed for most standard 3.5–5-gallon buckets and has dedicated pockets, measuring-tool features, and straps for long tools.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What size bucket fits the WORKPRO Bucket Tool Organizer?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Bucket Tool Organizer is designed to fit most standard buckets with a capacity of 3.5 to 5 gallons (13.2 to 18.9 L).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How many pockets does the WORKPRO Bucket Tool Organizer have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Bucket Tool Organizer has 51 pockets: 41 exterior pockets arranged in triple rows and 10 interior pockets.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570568175994,"sku":"B0757HQFX3","price":49.56,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-bucket-organizer-front-view.jpg?v=1794776944"},{"product_id":"workpro-pink-work-gloves-medium-with-touchscreen-fingertips-and-adjustable-wrist","title":"WORKPRO Pink Work Gloves, Medium with Touchscreen Fingertips and Adjustable Wrist","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Medium Pink Work Gloves are designed for hands-on jobs, with a polyester composite fabric back and touchscreen fingertips for working without removing your gloves.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolyester composite fabric back — offers greater strength and wear resistance than spandex fabric.\u003c\/li\u003e\n\u003cli\u003eSBR palm with a microfiber surface — combines shock absorption, elasticity, breathability, grip, and a soft feel.\u003c\/li\u003e\n\u003cli\u003eTouchscreen areas on the fingertips and backs of the fingers — let you operate a touchscreen while wearing the gloves.\u003c\/li\u003e\n\u003cli\u003eSoft terry cloth on the thumb and an adjustable wrist strap — help with sweat wiping and a closer hand fit.\u003c\/li\u003e\n\u003cli\u003eMedium size with a close-fitting design — choose one size up if you prefer a looser fit.\u003c\/li\u003e\n\u003cli\u003ePink Ribbon purchase donation — contributes to support for people affected by breast cancer.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese gloves are made for everyday tasks where a hand covering, grip, and access to touchscreen controls are useful. Their stated applications range from gardening and yard work to mechanic, construction, farming, warehouse, and outdoor activities.\u003c\/p\u003e\n\u003ch3\u003eWhat kinds of work are these gloves designed for?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO Pink Work Gloves are designed for mechanic work, construction, yard work, gardening, farming, landscaping, DIY projects, and warehouse tasks. They are also suited to travel, fishing, outdoor work, and hunting. The palm combines SBR fabric with a microfiber surface; the SBR is described as shockproof, wear-resistant, and elastic, while the microfiber is breathable, anti-slip, wear-resistant, and soft.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse settings include indoor work, garden tasks, and outdoor activities.\u003c\/li\u003e\n\u003cli\u003eThe palm surface is made with microfiber over SBR fabric.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eCan I operate a touchscreen while wearing them?\u003c\/h3\u003e\n\u003cp\u003eYes. WORKPRO Pink Work Gloves have touchscreen areas on the fingertips and the backs of the fingers, so you can use a touchscreen without taking the gloves off. A soft terry cloth section on the back of the thumb gives you a place to wipe sweat while working.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTouchscreen design covers the fingertips and backs of the fingers.\u003c\/li\u003e\n\u003cli\u003eThe thumb’s terry cloth section is intended for wiping sweat.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do the gloves fit?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO Medium Pink Work Gloves are designed to fit close to the hand. If you want a looser fit, choose one size larger; the adjustable wrist strap helps secure the glove at the wrist.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMedium is the size identified for this product.\u003c\/li\u003e\n\u003cli\u003eThe wrist strap adjusts for a more fitted feel.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat does the Pink Ribbon purchase support?\u003c\/h3\u003e\n\u003cp\u003eA purchase of WORKPRO Pink Work Gloves contributes to National Breast Cancer Foundation, Inc. (NBCF), whose Helping Women Now work includes early detection, education, and support services for people affected by breast cancer. For the stated period from October 1, 2025 to September 31, 2026, purchases of this product result in a minimum donation of $15,000 to Helping Women Now.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe donation supports NBCF’s early detection, education, and support services.\u003c\/li\u003e\n\u003cli\u003eThe stated minimum donation for the campaign period is $15,000.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese gloves suit people who want a close-fitting work glove for hands-on tasks, with touchscreen access and a range of stated indoor and outdoor uses. The Medium size, adjustable wrist strap, and task-focused palm and back fabrics make them a fit for work where those features are useful.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can I use a touchscreen while wearing WORKPRO Pink Work Gloves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. WORKPRO Pink Work Gloves have touchscreen areas on the fingertips and backs of the fingers, so you can operate a touchscreen without removing them.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How should I choose a fit for WORKPRO Pink Work Gloves?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Pink Work Gloves in Medium are designed for a close fit. Choose one size up if you prefer a looser fit, and adjust the wrist strap for a more fitted feel.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570832548218,"sku":"B09NW3BPG2","price":31.61,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-pink-work-gloves-front-view.jpg?v=1794783955"},{"product_id":"workpro-pex-pipe-cutter-1-8-1-5-8-in-spring-loaded-with-angled-cuts","title":"WORKPRO PEX Pipe Cutter, 1\/8–1-5\/8 in, Spring-Loaded with Angled Cuts","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO PEX Cutter is a spring-loaded pipe and hose cutter for household, plumbing, and automotive projects, cutting compatible tubing from 1\/8 in (3.175 mm) to 1-5\/8 in (41.275 mm) and offering 30° and 45° cord-cover cuts.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCutting range of 1\/8–1-5\/8 in across PEX, PPR, PE, PP, and rubber hose — handles a range of common pipe and tubing jobs.\u003c\/li\u003e\n\u003cli\u003e30° and 45° cutting positions for rectangular cord covers — helps create angled cuts for different project needs.\u003c\/li\u003e\n\u003cli\u003e7Cr17MoV blade — designed to resist rust, bending, and breaking while making even, accurate cuts.\u003c\/li\u003e\n\u003cli\u003eSpring-loaded mechanism — speeds up positioning and supports convenient one-hand operation.\u003c\/li\u003e\n\u003cli\u003eAluminum-alloy body — keeps the cutter lightweight for less fatigue during extended cutting work.\u003c\/li\u003e\n\u003cli\u003eSupport the pipe on both sides for perfectly straight cuts — helps you set up for the result you need.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen plumbing repairs, household maintenance, or automotive work calls for quick cuts through tubing or hose, a cutter that suits the material and diameter can make the task more manageable. WORKPRO’s cutter is made for use with several common plastic pipe types and rubber hose, with a stand configuration for round tubes and another for square or rectangular flat tubes and cord covers.\u003c\/p\u003e\n\u003ch3\u003eWhich pipes and hoses can the WORKPRO cutter cut?\u003c\/h3\u003e\n\u003cp\u003eIt cuts PEX, PPR, PE, PP, and rubber hose with diameters from 1\/8 in (3.175 mm) to 1-5\/8 in (41.275 mm). This range makes it suitable for a variety of household maintenance, plumbing, and automotive repair tasks. Compare the material and diameter of the tube you plan to cut with this range before choosing the tool.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade for pipes and tubes, including the five listed materials.\u003c\/li\u003e\n\u003cli\u003eDesigned for homeowners and plumbers working on maintenance and repair projects.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do the 30° and 45° cutting positions work?\u003c\/h3\u003e\n\u003cp\u003eThe cutter’s stand position determines how it is set up for different shapes: keep the stand naturally flat for round tubes, and fold it for square or rectangular flat tubes and angled rectangular cord-cover cuts. The two angle options provide a choice between 30° and 45° when cutting rectangular cord cover.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eStand flat for round tubing.\u003c\/li\u003e\n\u003cli\u003eFold the stand for square or rectangular flat tubing.\u003c\/li\u003e\n\u003cli\u003eUse the 30° or 45° design for rectangular cord-cover cuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat makes this cutter convenient for repeated cuts?\u003c\/h3\u003e\n\u003cp\u003eA spring-loaded mechanism helps position the cutter quickly and enables one-hand operation. The 7Cr17MoV blade is designed to make even, accurate cuts with less tendency to deviate, while resisting rust, bending, and breaking. Its lightweight aluminum-alloy body is intended to reduce fatigue during longer cutting sessions.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe body combines high hardness, toughness, and strength.\u003c\/li\u003e\n\u003cli\u003eFor a perfectly straight cut, support the pipe from both sides while cutting.\u003c\/li\u003e\n\u003cli\u003eThe cutter is designed for quick, easy cuts.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWORKPRO PEX Cutter suits homeowners and plumbers who need one hand-operated tool for compatible pipes, tubes, and rubber hose during household, plumbing, or automotive work. Its stated material range, spring-loaded operation, and two cord-cover cutting angles define its practical fit.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What materials and sizes can the WORKPRO PEX Cutter cut?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO PEX Cutter is designed for PEX, PPR, PE, PP, and rubber hose with diameters from 1\/8 in (3.175 mm) to 1-5\/8 in (41.275 mm).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Can the WORKPRO PEX Cutter make angled cord-cover cuts?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: Yes. The WORKPRO PEX Cutter has 30° and 45° cutting positions for rectangular cord covers; fold the stand for square or rectangular flat tubing.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570849653114,"sku":"B0C3B1DY1Q","price":32.81,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-pex-cutter-front-view.jpg?v=1794784388"},{"product_id":"workpro-3-8-inch-drive-crowfoot-wrench-set-10-piece-sae-chrome-plated","title":"WORKPRO 3\/8-Inch Drive Crowfoot Wrench Set, 10-Piece SAE, Chrome-Plated","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO 3\/8-inch-drive crowfoot wrench set is made for reaching nuts and bolts in tight spaces, with 10 SAE sizes and a heat-treated, chrome-plated carbon steel construction.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 SAE crowfoot wrenches — cover a range of common fastener sizes.\u003c\/li\u003e\n\u003cli\u003eHeat-treated carbon steel with a chrome-plated finish — made for strength, durability, and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/8-inch-drive ratchets, extension bars, and torque wrenches — use the tools you already have.\u003c\/li\u003e\n\u003cli\u003e14-clip organizer with mounting holes on both sides — keep the wrenches organized and accessible.\u003c\/li\u003e\n\u003cli\u003eDesigned for tight-access repairs — reach fasteners in automotive, truck, lawn equipment, and plumbing applications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen a nut or bolt is difficult to reach with a conventional wrench, a crowfoot wrench can provide access in restricted work areas. This WORKPRO set is intended for repair and installation tasks around engine bays, radiators, control arms, and under-sink plumbing, including faucet and spray hose installation.\u003c\/p\u003e\n\u003ch3\u003eWhat work is the WORKPRO crowfoot wrench set made for?\u003c\/h3\u003e\n\u003cp\u003eIt is designed to help speed up installation and removal of nuts and bolts in tight spaces. The set is suited to automotive, truck, and lawn equipment repairs, as well as under-sink plumbing work. Its range of SAE sizes supports different fasteners across these applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUseful in tight engine bays and around radiators and control arms.\u003c\/li\u003e\n\u003cli\u003eIntended for faucet and spray hose installation beneath sinks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhich tools does this set fit?\u003c\/h3\u003e\n\u003cp\u003eEach crowfoot wrench fits a 3\/8-inch drive, equivalent to 9.5 mm, and works with 3\/8-inch-drive ratchets, extension bars, or torque wrenches. Match the drive size of your tool to the set before use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe full set is 10 inches (25.4 cm) long.\u003c\/li\u003e\n\u003cli\u003eTotal set weight is 1.06 lb (0.48 kg).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat sizes are included?\u003c\/h3\u003e\n\u003cp\u003eThe 10-piece SAE set includes one crowfoot wrench in each of these sizes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/8 inch (9.5 mm), 7\/16 inch (11.1 mm), and 1\/2 inch (12.7 mm).\u003c\/li\u003e\n\u003cli\u003e9\/16 inch (14.3 mm), 5\/8 inch (15.9 mm), and 11\/16 inch (17.5 mm).\u003c\/li\u003e\n\u003cli\u003e3\/4 inch (19.1 mm), 13\/16 inch (20.6 mm), 7\/8 inch (22.2 mm), and 1 inch (25.4 mm).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow are the wrenches made and stored?\u003c\/h3\u003e\n\u003cp\u003eThe wrenches are made from heavy-duty carbon steel that is heat-treated and chrome-plated. Laser-etched markings make each size easier to identify. The included organizer has 14 clips, giving it room for additional wrench sizes without requiring more storage space.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMounting holes on both sides allow the organizer to be installed on a wall or another surface.\u003c\/li\u003e\n\u003cli\u003eThe clips keep the set arranged for quick access between tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis set suits mechanics and DIY users handling SAE fasteners in confined repair areas, including automotive, equipment, and under-sink jobs. It combines a 3\/8-inch-drive fit, 10 SAE wrench sizes, and a mountable organizer for tight-access work.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What sizes come in the WORKPRO 3\/8-inch-drive crowfoot wrench set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO crowfoot wrench set includes 10 SAE sizes, from 3\/8 inch through 1 inch: 3\/8, 7\/16, 1\/2, 9\/16, 5\/8, 11\/16, 3\/4, 13\/16, 7\/8, and 1 inch.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What tools fit the WORKPRO crowfoot wrench set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO crowfoot wrench set fits 3\/8-inch-drive ratchets, extension bars, and torque wrenches.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570851193210,"sku":"B09ZXMQSF8","price":39.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-crowfoot-wrench-set-full-set.jpg?v=1794784452"},{"product_id":"workpro-12-in-1-ratcheting-screwdriver-set-with-s2-steel-bits","title":"WORKPRO 12-in-1 Ratcheting Screwdriver Set with S2 Steel Bits","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO 12-in-1 Ratcheting Multi-Bit Screwdriver Set is a carry-ready driver for DIY, home repairs and outdoor tasks, with six double-ended S2 steel bits stored inside its handle.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSix double-ended bits provide 12 driver tips — switch among tip types for different fastening jobs.\u003c\/li\u003e\n\u003cli\u003eForward, reverse and locking ratchet positions — choose the setting that suits the task.\u003c\/li\u003e\n\u003cli\u003ePatented quick-load, auto-lock mechanism — load a bit with one hand.\u003c\/li\u003e\n\u003cli\u003eBits store inside the handle — keep the set together for convenient carry and everyday carry (EDC).\u003c\/li\u003e\n\u003cli\u003eErgonomic handle with a slip-resistant grip — supports comfortable holding and higher torque output.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor small repairs and varied fastening tasks, carrying several separate drivers can take up space and make it harder to keep the right tip close by. This set brings 12 bit options into one ratcheting screwdriver, with the bits housed in the handle. It is made for DIY, home repair and outdoor use, where a single tool can serve multiple purposes.\u003c\/p\u003e\u003ch3\u003eHow does the WORKPRO ratcheting screwdriver work?\u003c\/h3\u003e\u003cp\u003eThe ratchet switches between forward, reverse and locking positions. The direction switch lets you choose how the handle engages while driving or loosening a fastener, while the locking position provides a non-ratcheting setting.\u003c\/p\u003e\u003cp\u003eIts patented quick-load mechanism uses an auto-lock to secure a loaded bit, and the bit-loading action can be done with one hand.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThree settings: forward, reverse and lock.\u003c\/li\u003e\n\u003cli\u003eOne-handed bit loading with an auto-lock mechanism.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhich bits come with the WORKPRO 12-in-1 screwdriver?\u003c\/h3\u003e\u003cp\u003eThe set includes one screwdriver handle and six double-ended bits, giving you 12 tips in total. The bits are S2 steel, have a 1\/4-inch (0.635 cm) hex shank and measure 3-1\/2 inches (8.89 cm) long.\u003c\/p\u003e\u003cp\u003eThe six tip pairs are SL4\/5, PH1\/PH3, SQ2\/PH2, SQ3\/SQ1, T10\/T15 and T20\/T25. Keeping these combinations inside the handle makes the included tips accessible together rather than loose in a separate bit holder.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eTip types include slotted, Phillips, square and Torx.\u003c\/li\u003e\n\u003cli\u003eOne handle and six double-ended bits are included.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eIs this screwdriver suited to DIY, home repair and outdoor tasks?\u003c\/h3\u003e\u003cp\u003eYes. WORKPRO makes this multi-purpose set for DIY, home repair and outdoor use. Its handle has an ergonomic shape and slip-resistant grip, designed for comfortable holding and higher torque output while reducing hand labor during use.\u003c\/p\u003e\u003cp\u003eBecause the included bits store inside the handle, the set is easy to carry for everyday tasks. Select a bit tip that matches the fastener, then choose the ratchet setting that fits the direction of work.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDesigned for multi-purpose use at home, for DIY and outdoors.\u003c\/li\u003e\n\u003cli\u003eBit storage is integrated into the handle for carry.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis set is a practical fit for people who want several driver tip options in one handle for repairs, projects and outdoor tasks. Its six stored double-ended bits, three ratchet settings and ergonomic grip bring the listed functions together in a compact carry-ready screwdriver set.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What bits are included with the WORKPRO 12-in-1 Ratcheting Multi-Bit Screwdriver Set?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO 12-in-1 Ratcheting Multi-Bit Screwdriver Set includes six double-ended S2 steel bits: SL4\/5, PH1\/PH3, SQ2\/PH2, SQ3\/SQ1, T10\/T15 and T20\/T25.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What ratchet settings does the WORKPRO screwdriver have?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO 12-in-1 Ratcheting Multi-Bit Screwdriver Set has forward, reverse and locking positions, plus a patented auto-lock quick-load mechanism for one-handed bit loading.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570863284602,"sku":"B0761K3H82","price":37.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-ratcheting-screwdriver-front-view.jpg?v=1794784964"},{"product_id":"workpro-oil-filter-wrench-set-9-and-12-inch-adjustable-pliers","title":"WORKPRO Oil Filter Wrench Set, 9- and 12-Inch Adjustable Pliers","description":"\u003cp\u003e\u003cstrong\u003eThe WORKPRO oil filter wrench set includes 9-inch (22.86 cm) and 12-inch (30.48 cm) adjustable pliers for removing and installing oil filters.\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCarbon steel with a gray phosphate finish — made for automotive maintenance and everyday repairs.\u003c\/li\u003e\n\u003cli\u003eFive-position slip joint — lets you adjust the jaws for different sizes.\u003c\/li\u003e\n\u003cli\u003eAngled, serrated gripping teeth — help hold slippery, oil-covered surfaces and grip in either direction.\u003c\/li\u003e\n\u003cli\u003eExtended handles — provide reach and leverage when working around hard-to-access components.\u003c\/li\u003e\n\u003cli\u003eAdjustable plier design — also grips and turns compatible PVC pipe fittings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eOil filters and fittings can be difficult to grip, particularly when space is limited or a surface is slick with oil. This two-wrench set is made for filter removal and installation on cars, motorcycles, and trucks, as well as compatible PVC fitting work in plumbing and general assembly. Its two tool lengths and adjustable jaws suit a range of common gripping tasks.\u003c\/p\u003e\u003ch3\u003eWhat sizes can the WORKPRO oil filter wrenches grip?\u003c\/h3\u003e\u003cp\u003eThe 9-inch wrench fits objects from 1-3\/4 to 3 inches (4.45 to 7.62 cm) in diameter, while the 12-inch wrench adjusts from 2-1\/2 to 3-3\/4 inches (6.35 to 9.53 cm). A five-position slip joint provides the jaw adjustment for these different diameters.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the 9-inch tool for objects within its stated diameter range.\u003c\/li\u003e\n\u003cli\u003eChoose the 12-inch tool for objects within its larger stated range.\u003c\/li\u003e\n\u003cli\u003eCompare the object’s diameter with the applicable range when selecting a wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhat jobs are these WORKPRO pliers designed for?\u003c\/h3\u003e\u003cp\u003eThey are designed to remove and install oil filters on cars, motorcycles, and trucks, and to turn compatible PVC pipe fittings. The adjustable jaws and extended handles are useful when components are difficult to reach or need additional leverage.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSuitable for automotive maintenance and general repair tasks.\u003c\/li\u003e\n\u003cli\u003eAlso intended for plumbing and general assembly involving compatible PVC fittings.\u003c\/li\u003e\n\u003cli\u003eCompatibility is for PVC fittings the jaws can grip; the set is not described as fitting every pipe or fitting.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow do the jaws grip oil filters?\u003c\/h3\u003e\u003cp\u003eAngled, serrated teeth are designed to bite into a surface and hold in either direction. On slippery, oil-covered filters, this tooth pattern helps reduce slipping while you turn the tool.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAdjust the jaw opening using the slip joint.\u003c\/li\u003e\n\u003cli\u003ePosition the teeth against the filter or fitting before turning.\u003c\/li\u003e\n\u003cli\u003eThe longer handles provide additional reach and leverage in confined spaces.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis set suits vehicle owners and repair users who need adjustable pliers for oil filters, along with compatible PVC fitting tasks. Its two lengths cover the stated diameter ranges, and the extended handles and angled teeth support gripping and turning in harder-to-reach work areas.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What diameter range does each WORKPRO oil filter wrench fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO 9-inch oil filter wrench fits 1-3\/4 to 3 inches in diameter; the 12-inch wrench adjusts from 2-1\/2 to 3-3\/4 inches.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What can I use the WORKPRO oil filter wrench set for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO oil filter wrench set is designed for removing and installing oil filters on cars, motorcycles, and trucks, and turning compatible PVC pipe fittings.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570889204090,"sku":"B08M9D22WW","price":33.02,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-oil-filter-wrench-set-front-view.jpg?v=1794786368"},{"product_id":"workpro-exhaust-hanger-removal-tool-blue-with-4-rubber-hangers-and-offset-head","title":"WORKPRO Exhaust Hanger Removal Tool, Blue, with 4 Rubber Hangers and Offset Head","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Exhaust Hanger Removal Tool is designed to remove rubber exhaust hangers from most domestic and imported vehicles, with a narrow offset head and four rubber hangers included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarbon steel with a rust-resistant coating — made for repeated use in a repair shop or home garage.\u003c\/li\u003e\n\u003cli\u003eNarrow, offset head — reaches rubber brackets mounted deep under a vehicle.\u003c\/li\u003e\n\u003cli\u003eSqueeze-to-release design and PVC-coated handles — support controlled handling, including in greasy or slippery conditions.\u003c\/li\u003e\n\u003cli\u003eDesigned for most domestic and imported vehicles with rubber exhaust hangers — useful for mufflers, tailpipes and full exhaust systems.\u003c\/li\u003e\n\u003cli\u003eOne removal tool and four rubber hangers — the set includes components for exhaust-hanger work.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eRemoving rubber supports can be difficult when a hanger sits deep beneath a vehicle. This tool is made for that access challenge and for work on mufflers, tailpipes or complete exhaust systems. Its design suits professional mechanics and DIY users working in an auto repair shop or home garage.\u003c\/p\u003e\n\u003ch3\u003eWill the WORKPRO tool fit my vehicle and reach the hanger?\u003c\/h3\u003e\n\u003cp\u003eThe WORKPRO tool is designed for most domestic and imported vehicles that use rubber exhaust hangers. It measures 12 inches (30.48 cm) long and opens to a maximum jaw width of 2.52 inches (6.4 cm). The narrow, offset head is intended to reach deeply mounted rubber brackets, helping remove hangers without damaging nearby components. Good to know: vehicle compatibility depends on having rubber exhaust hangers.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTool weight: 0.92 lb (0.42 kg).\u003c\/li\u003e\n\u003cli\u003eSuitable exhaust work includes mufflers, tailpipes and full exhaust systems.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow does the WORKPRO exhaust hanger removal tool work?\u003c\/h3\u003e\n\u003cp\u003eThe tool uses a squeeze-to-release action to remove rubber exhaust supports. Its ergonomic handles have a PVC coating that provides a non-slip grip for controlled use, including when conditions are greasy or slippery. The carbon steel construction and rust-resistant coating are intended to support repeated use.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe offset head gives access to hangers positioned deep under the vehicle.\u003c\/li\u003e\n\u003cli\u003eThe tool is made for removal work on rubber exhaust brackets.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat is included, and who is this set for?\u003c\/h3\u003e\n\u003cp\u003eThe WORKPRO set contains one exhaust hanger removal tool and four rubber hangers. It is intended for professional mechanics and DIY mechanics carrying out exhaust work in a repair shop or home garage. The blue tool combines the removal function with the included rubber hangers in one set.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eQuantity: one removal tool.\u003c\/li\u003e\n\u003cli\u003eQuantity: four rubber hangers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis set is suited to mechanics and vehicle owners who work with rubber exhaust supports and need to reach brackets beneath the vehicle. It is designed for vehicles with rubber exhaust hangers and for exhaust work involving mufflers, tailpipes or full systems.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: Which vehicles does the WORKPRO Exhaust Hanger Removal Tool fit?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Exhaust Hanger Removal Tool is designed for most domestic and imported vehicles that use rubber exhaust hangers.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What comes with the WORKPRO Exhaust Hanger Removal Tool?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO Exhaust Hanger Removal Tool set includes one removal tool and four rubber hangers.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570927706490,"sku":"B0F1SW8RKN","price":34.01,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-exhaust-hanger-tool-front-view.jpg?v=1794788659"},{"product_id":"workpro-stubby-adjustable-wrench-4-inch-with-thin-jaws-and-15-16-inch-opening","title":"WORKPRO Stubby Adjustable Wrench, 4-Inch with Thin Jaws and 15\/16-Inch Opening","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO’s 4-inch (10.16 cm) stubby adjustable wrench is made for light-duty precision work in restricted areas, with a jaw opening up to 15\/16 in (24 mm).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4-inch stubby format — compact and lightweight for portable use and toolbox storage.\u003c\/li\u003e\n\u003cli\u003eThin jaws — reach into tight spaces and work around small fasteners.\u003c\/li\u003e\n\u003cli\u003eJaw opens up to 15\/16 in (24 mm) — accommodates a wider range of fastener sizes.\u003c\/li\u003e\n\u003cli\u003eHigh-grade Cr-V steel with a black oxide finish — made for durability and corrosion resistance.\u003c\/li\u003e\n\u003cli\u003eLaser-etched metric and imperial scales — provide clear measurements for adjustments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhen a full-size wrench is difficult to position, a short tool with slim jaws can make light-duty adjustments easier in confined work areas. WORKPRO’s stubby adjustable wrench is suited to precision tasks involving small nuts or washers, as well as repair and maintenance jobs where access is limited.\u003c\/p\u003e\n\u003ch3\u003eCan this wrench reach fasteners in tight spaces?\u003c\/h3\u003e\n\u003cp\u003eYes. Its short format and thin jaws are designed for restricted areas, including work where a wider jaw profile would be difficult to position. It is more suitable for light-duty tasks and precision work than for applications that call for heavy wrenching.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for use with small nuts and washers.\u003c\/li\u003e\n\u003cli\u003eCan be paired with another wrench when a task calls for two tools.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat fastener sizes and measurements does it support?\u003c\/h3\u003e\n\u003cp\u003eThe adjustable jaw opens to 15\/16 in (24 mm), giving the wrench capacity for a range of fastener sizes. Laser-etched markings show metric and imperial measurements, helping you make quick, accurate jaw adjustments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe measurement markings are etched directly onto the wrench.\u003c\/li\u003e\n\u003cli\u003eDual-unit markings provide both metric and imperial references.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat kinds of jobs is it made for?\u003c\/h3\u003e\n\u003cp\u003eThis wrench is intended for automotive and motorcycle repairs, plumbing tasks, and general household maintenance. Its adjustable design supports work with different fastener sizes, while its compact shape suits jobs in confined areas.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse it for automotive repair and motorcycle maintenance.\u003c\/li\u003e\n\u003cli\u003eIt is also suited to plumbing and household maintenance tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWORKPRO’s stubby adjustable wrench suits repair workers and home users who need a portable tool for light-duty precision tasks in limited-access areas. Its intended role is compact, adjustable wrench work across vehicle, plumbing, and household projects.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What is the maximum jaw opening of the WORKPRO stubby adjustable wrench?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO 4-inch stubby adjustable wrench opens up to 15\/16 in (24 mm) to fit a range of fastener sizes.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What jobs is the WORKPRO stubby adjustable wrench suited for?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: The WORKPRO stubby adjustable wrench is made for light-duty precision work, including automotive and motorcycle repairs, plumbing, and household maintenance.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570937864570,"sku":"B0CVXKVCZ7","price":30.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-stubby-wrench-front-view.jpg?v=1794789115"},{"product_id":"workpro-mini-water-pump-pliers-4-inch-compact-groove-joint-tool-with-15-jaw-positions","title":"WORKPRO Mini Water Pump Pliers, 4-Inch Compact Groove-Joint Tool with 15 Jaw Positions","description":"\u003cp\u003e\u003cstrong\u003eWORKPRO Mini Water Pump Pliers are compact groove-joint pliers for plumbing, automotive and household repairs, with a 4-inch (10.16 cm) length and slim head for tight spaces.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePush-button adjustment with 15 jaw positions — change the jaw size quickly for different tasks.\u003c\/li\u003e\n\u003cli\u003eV-shaped jaws with multi-point contact — grip round, flat, square and hexagonal objects.\u003c\/li\u003e\n\u003cli\u003eHeat-treated steel and a plated finish — resist rust and wear during repair work.\u003c\/li\u003e\n\u003cli\u003eRibbed handle design — supports a stable grip in wet or oily conditions.\u003c\/li\u003e\n\u003cli\u003eIntegrated hanging hole — gives the tool a built-in storage option.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWorking around confined areas can make it difficult to position a larger tool or hold different shapes securely. These mini water pump pliers are made for gripping, turning and holding during plumbing, automotive and household repair tasks, with an adjustable jaw and compact form suited to close-up work.\u003c\/p\u003e\n\u003ch3\u003eWhat repair jobs are these pliers designed for?\u003c\/h3\u003e\n\u003cp\u003eWORKPRO Mini Water Pump Pliers are intended for plumbing, automotive and household repairs. Their short overall length and slim head are designed to help reach into tight spaces while maintaining control of the tool.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUse them for gripping, turning and holding.\u003c\/li\u003e\n\u003cli\u003eThe compact 4-inch format is suited to close-up repair tasks.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow do the jaws adjust, and what shapes can they grip?\u003c\/h3\u003e\n\u003cp\u003eA push-button mechanism adjusts the jaws across 15 positions. The V-jaw makes multi-point contact with round, flat, square or hexagonal objects, giving the pliers a range of shapes to work with for gripping, turning and holding.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePress the adjustment button to change the jaw position.\u003c\/li\u003e\n\u003cli\u003eChoose from 15 jaw positions for different task sizes.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWhat are the pliers made of, and how are they stored?\u003c\/h3\u003e\n\u003cp\u003eThe pliers are manufactured from heat-treated steel with a plated finish that resists rust and wear. Ribbing on the handle is designed to improve grip stability, including when hands or working surfaces are wet or oily. An integrated hole provides a way to hang the tool for storage.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMade for repair settings that include plumbing, automotive and household work.\u003c\/li\u003e\n\u003cli\u003eHang the tool using the hole built into the pliers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThese pliers suit people handling repairs that call for a compact tool, adjustable jaws and control around confined work areas. Their 4-inch length, slim head and multiple jaw positions combine in one tool for gripping, turning and holding.\u003c\/p\u003e\n\u003csection class=\"product-faq-snippet\"\u003e\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: How long are WORKPRO Mini Water Pump Pliers?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Mini Water Pump Pliers are 4 inches (10.16 cm) long and have a slim head designed for work in tight spaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"faq-item\"\u003e\n\u003cp class=\"faq-q\"\u003eQ: What can WORKPRO Mini Water Pump Pliers grip?\u003c\/p\u003e\n\u003cp class=\"faq-a\"\u003eA: WORKPRO Mini Water Pump Pliers have V-shaped jaws with multi-point contact for gripping round, flat, square and hexagonal objects.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/section\u003e","brand":"WORKPRO","offers":[{"title":"Default Title","offer_id":57570939175290,"sku":"B0FX95FX18","price":33.05,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/files\/workpro-mini-water-pump-pliers-front-view.jpg?v=1794789179"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0954\/7579\/4298\/collections\/workpro-kneeling-pad-front-view.jpg?v=1794838516","url":"https:\/\/bargaincatcher.co.uk\/collections\/brand-workpro.oembed","provider":"BARGAIN CATCHER","version":"1.0","type":"link"}